【摘要】：The cables are more likely to deteriorate after several years of service in Shanghai,a city with a humid climate and abundant rainfall.Before assessing the aging status of those cables,it is critical to present effective test parameters which are sensitive to the aging process under special field conditions.Therefore,we have performed water tree investigation,tensile test,and differential scanning calorimetry(DSC)test on hundreds of cable samples removed from service.A large number of typical bowtie water trees were found in cable insulation and the water tree content was proposed to characterize the degree of water treeing.Based on Arrhenius Equation and equivalent thermal history parameters estimated from DSC profiles,we also proposed a new parameter ln(t/τθ)to characterize the aging status of cable insulation,Where,t is treated duration andτθis the thermal life under treated temperature.The applicabilities of water tree content,tensile strength,and ln(t/τθ)are tested using the analysis of variance(ANOVA).Then we investigated the relationship between the tensile strength and the water tree content using regression analysis,and analyzed the relationship between ln(t/τθ)and the tensile strength.The results indicated that each of these parameters performs differently with cables which experienced different degrees of age related degradation,and can be used to identify the aging status of field aged cables.The tensile strength can reflect the water treeing condition of field aged cables very well as a commonly used functional parameter.Since ln(t/τθ)is strongly related to the tensile strength,it is an effective parameter to characterize the aging status of field aged cable insulation.Using this newly proposed parameter is more time saving because of the convenience in sampling.
[Abstract]:The cables are more likely to deteriorate after several years of service in Shanghai,a city with a humid climate and abundant rainfall.Before assessing the aging status of those cables,it is critical to present effective test parameters which are sensitive to the aging process under special field conditions.Therefore,we have performed water tree investigation,tensile test, And differential scanning calorimetry (DSC) test on hundreds of cable samples removed from service.A large number of typical bowtie water trees were found in cable insulation and the water tree content was proposed to characterize the degree of water treeing.Based on Arrhenius Equation and equivalent thermal history parameters estimated from DSC profiles, We also proposed a new parameter ln (t / 蟿 胃) to characterize the aging status of cable insulation,Where,t is treated duration and 蟿 胃 is the thermal life under treated temperature.The applicabilities of water tree content,tensile strength, And ln (t / 蟿 胃) are tested using the analysis of variance (ANOVA). Then we investigated the relationship between the tensile strength and the water tree content using regression analysis,and analyzed the relationship between ln (t / 蟿 胃) and the tensile strength.The results indicated that each of these parameters performs differently with cables which experienced different degrees of age related degradation, And can be used to identify the aging status of field aged cables.The tensile strength can reflect the water treeing condition of field aged cables very well as a commonly used functional parameter.Since ln (t / 蟿 胃) is strongly related to the tensile strength,) It is an effective parameter to characterize the aging status of field aged cable insulation.Using this newly proposed parameter is more time saving because of the convenience in sampling.
【作者單位】： Shanghai
【基金】：Project supported by Special Fund of the National Priority Basic Research of China(2014CB239503) National Natural Science Foundation of China(51277117) Shanghai Science and Technology Commission(11DZ2283000)
【分類號】：TM247

【相似文獻】

相關期刊論文 前10條

1 ;Mechanical Characterization of Electroplated Ni Films by Micro-tensile Testing[J];Chinese Journal of Mechanical Engineering;2009年04期

2 易賢仁;;Flexural-tensile Properties of Layered Steel Fiber Reinforced Rubber Concrete[J];Journal of Wuhan University of Technology(Materials Science Edition);2009年05期

3 章橋新,張東明,黃孝友;ANALYSIS ON MECHANISM OF FRACTURE FOR THE SURFACE-HARDENING STEEL[J];Journal of Wuhan University of Technology-Materials Science;1995年04期

4 ;Microstructure and tensile behavior of hot extruded AZ91 alloys at room temperature[J];Journal of University of Science and Technology Beijing(English Edition);2002年05期

5 A.Kiet Tieu;;Modeling uniaxial tensile deformation of polycrystalline Al using CPFEM[J];Journal of University of Science and Technology Beijing;2008年01期

6 ;Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process[J];International Journal of Minerals Metallurgy and Materials;2011年01期

7 ;An apparatus for measuring mechanical properties of microstructures in tensile mode[J];Science in China(Series G:Physics,Mechanics & Astronomy);2004年S1期

8 ;Effect of the geometric shapes of specimens on impact tensile tests[J];Journal of Zhejiang University-Science A(Applied Physics & Engineering);2010年10期

9 ;Grain boundary characteristics and tensile properties of Ti14 alloy after semi-solid deformation[J];International Journal of Minerals Metallurgy and Materials;2011年05期

10 DING Lei;LIN Jianping;MIN Junying;PANG Zheng;YE You;;Necking of Q&P Steel during Uniaxial Tensile Test with the Aid of DIC Technique[J];Chinese Journal of Mechanical Engineering;2013年03期

相關會議論文 前10條

1 郭翔;周敏;;Cohesive Zone Modeling of Fracture Resistance of AZ31 Mg Alloy[A];第16屆全國疲勞與斷裂學術會議會議程序冊[C];2012年

2 P.Jiang;X.-L.Wu;;Extraordinary tensile strengthening of graded structure IF steel[A];第十二屆全國物理力學學術會議論文摘要集[C];2012年

3 Juan Qu;Kui Zhang;Minglong Ma;Yongjun Li;Xinggang Li;;Effect of Heat Treatment on the Structure and Properties of EW75 Magnesium Alloy Plate[A];中國材料大會2012第18分會場：先進鎂合金及其應用論文集[C];2012年

4 ;Dynamic testing of materials with a rotating disk indirect bar-bar tensile impact apparatus[A];固體力學進展及應用——慶賀李敏華院士90華誕文集[C];2007年

5 ;Continuous Nanoscale Carbon Fibers with Superior Mechanical Strength[A];2009年全國高分子學術論文報告會論文摘要集（下冊）[C];2009年

6 Dongqing Zhao;Xuguang Dong;Xinen Zhang;Anjiang Gao;Jixue Zhou;Yuansheng Yang;;Microstructure and Tensile Properties of Mg-4Zn-2Sn-2Al Alloy[A];中國材料大會2012第18分會場：先進鎂合金及其應用論文集[C];2012年

7 Baoyi Yu;Tianjiao Gao;Qi Li;Yujuan Wu;Runxia Li;;Microstructure and Mechanical Properties of Extruded AZ31 Profile with High Performance[A];中國材料大會2012第18分會場：先進鎂合金及其應用論文集[C];2012年

8 Bingqing Shi;Rongshi Chen;Wei Ke;;Effects of Solid Solution Treatments on Microstructures and Tensile Properties of a Mg-Y-Zn-Cu Alloy[A];中國材料大會2012第18分會場：先進鎂合金及其應用論文集[C];2012年

9 Jianwei Xu;Yunsong Zhao;Dingzhong Tang;;Tensile Properties of a Low-cost First Generation Single Crystal Superalloy DD16[A];中國材料大會2012第19分會場：高溫合金論文集[C];2012年

10 Haoran Geng;Peng Liu;Huawei Jiang;Bo Teng;;Effects of Si on Structure and Properties of Mg-Sn Alloy[A];Proceedings of 2012 China Functional Materials Technology and Industry Forum[C];2012年

相關博士學位論文 前1條

1 Mbwana Suleiman Ndaro;[D];東華大學;2008年

相關碩士學位論文 前1條

1 Farzana Khan（范佳娜）;[D];東華大學;2013年

，

本文編號：2411513