【摘要】：變壓器繞組變形導致的內部匝間故障已經上升至事故率的首位,對電網安全性危害極大。為此,提出一種變壓器繞組變形在線監測工程方法。利用以傅里葉為理論基礎的動態向量模型,在保持高精度的條件下簡化變壓器電磁暫態模型,并討論不同運行狀態下模型參數辨識解的個數。當變壓器空載合閘時辨識出繞組電阻參數,在變壓器穩態運行時利用已辨識出的電阻參數修改參數辨識模型,并辨識漏感參數。利用繞組變形與漏電感參數之間的關系,實現對變壓器繞組變形在監測。建立了變壓器繞組變形的仿真模型,使用有限元方法計算變壓器繞組變形的短路電感值,驗證了變壓器繞組在線監測方法的有效性。
[Abstract]:The inter-turn fault caused by transformer winding deformation has risen to the top of the accident rate, which is harmful to the power network safety. In this paper, an on-line monitoring method for transformer winding deformation is proposed. In this paper, the dynamic vector model based on Fourier theory is used to simplify the electromagnetic transient model of transformer under the condition of high accuracy, and the number of identification solutions of the model parameters in different operation states is discussed. The windings resistance parameters are identified when the transformer is closed without load, and the identified resistance parameters are used to modify the identification model during the steady operation of the transformer, and the leakage inductance parameters are identified. Based on the relationship between winding deformation and leakage inductance parameters, transformer winding deformation is monitored. The simulation model of transformer winding deformation is established, and the short circuit inductance of transformer winding deformation is calculated by finite element method, which verifies the effectiveness of on-line monitoring method of transformer winding.
【作者單位】： 上海電力學院電氣工程學院;重慶大學電氣工程學院;
【基金】：重慶大學輸配電裝備及系統安全與新技術國家重點實驗室訪問學者基金項目支持(2007DA10512712407)
【分類號】：TM403.2

【參考文獻】

中國期刊全文數據庫 前10條

1 王贊基,劉秀成,陳香輝;用于內部故障分析的變壓器電感參數計算模型[J];電力系統自動化;2000年24期

2 熊小伏,鄧祥力,游波;基于參數辨識的變壓器微機保護[J];電力系統自動化;1999年11期

3 索南加樂;康小寧;宋國兵;焦在濱;，

本文編號：2256728