發布時間：2018-05-19 06:43

  本文選題：配電網 + 故障定位��； 參考：《北京交通大學》2014年碩士論文

【摘要】：配電網故障定位系統是一種用于配電網的故障定位系統。它通過監測終端對配電網進行監測,當配電網發生故障后,故障信息會被發送給監測主站。監測主站收到故障信息后對配電網的故障信息進行整體分析,得出故障區段或故障點,并將故障區段或故障點的相關地理信息告知運行人員和維修人員。很明顯,根據此地理信息,維修人員可更快地找到故障區域,從而縮短了故障恢復時間。因此,配電網故障定位系統可以有效地提高配電網的供電可靠性。 本文所研究的配電網故障定位系統是一種區段故障定位系統,它采用GPRS作為主要通信網絡,其監測終端是故障指示器。整個系統由數據中心、DTU和故障指示器組成。其中,故障指示器被安裝在線路上,用于監測線路狀態。故障指示器可以通過無線射頻器與DTU進行交互通信,DTU可以通過GPRS網與數據中心進行交互通信。因此,故障指示器可以間接與數據中心進行交互通信。數據中心上安裝有故障分析軟件,它可以通過分析故障信息得出故障區段。 本文首先闡述了配電網故障定位系統的研究背景、意義及現狀。其次,對基于GPRS的配電網故障定位系統的組網原理、組網方案及方案安全性進行了介紹,并根據本故障定位系統的要求選定了最佳組網方案。然后,著重研究了故障分析軟件的開發思想和故障定位算法。在此部分,本文先分析了故障分析軟件的結構,然后根據此結構特點分別對組成軟件的各個子系統進行了分析。在每個子系統的研究分析過程中,本文大多是先介紹某子系統的功能,然后再根據該子系統的特點側重研究、分析和講解其核心內容,為講解清楚某些子系統的實現過程,使用了一定量的源碼。最后對全文進行了總結和展望。
[Abstract]:Distribution network fault location system is a fault location system used in distribution network. It monitors the distribution network through the monitoring terminal. When the distribution network fails, the fault information will be sent to the main monitoring station. After the main station receives the fault information, the fault information of the distribution network is analyzed as a whole, and the fault section or fault point is obtained, and the relevant geographic information of the fault section or fault point is informed to the operator and the maintenance personnel. Obviously, based on this geographic information, the maintainer can find the fault area more quickly, thus reducing the recovery time. Therefore, the distribution network fault location system can effectively improve the distribution network power supply reliability. The fault location system of distribution network studied in this paper is a section fault location system. It uses GPRS as the main communication network and its monitoring terminal is the fault indicator. The whole system consists of data center DTU and fault indicator. The fault indicator is installed on the line to monitor the line state. The fault indicator can communicate interactively with DTU via radio frequency device. DTU can communicate with data center through GPRS network. Therefore, the fault indicator can communicate indirectly with the data center. Fault analysis software is installed in the data center, which can get fault section by analyzing fault information. In this paper, the research background, significance and present situation of distribution network fault location system are introduced. Secondly, the principle, scheme and security of fault location system of distribution network based on GPRS are introduced, and the best scheme is selected according to the requirements of the fault location system. Then, the development idea and fault location algorithm of fault analysis software are studied. In this part, the structure of the fault analysis software is analyzed firstly, and then the subsystems of the software are analyzed according to the characteristics of the structure. In the research and analysis process of each subsystem, this paper mainly introduces the function of a subsystem, then according to the characteristics of the subsystem, analyzes and explains its core content, in order to explain the realization process of some subsystems. Used a certain amount of source code. Finally, the full text is summarized and prospected.
【學位授予單位】：北京交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM76

【參考文獻】

相關期刊論文 前10條

1 鄒航;楊元曄;茍光磊;;NAT網絡地址轉換技術分析[J];重慶工學院學報(自然科學版);2007年04期

2 孫雅明,廖志偉;基于不同RS與NN組合的數據挖掘配電網故障診斷模型[J];電力系統自動化;2003年06期

3 杜紅衛,孫雅明,劉弘靖,董偉;基于遺傳算法的配電網故障定位和隔離[J];電網技術;2000年05期

4 束洪春,孫向飛,司大軍;基于故障投訴電話信息的配電網故障定位粗糙集方法[J];電網技術;2004年01期

5 蔣秀潔,熊信銀,吳耀武,唐劍東;改進矩陣算法及其在配電網故障定位中的應用[J];電網技術;2004年19期

6 郭壯志;陳波;劉燦萍;許奎;李劍峰;;基于遺傳算法的配電網故障定位[J];電網技術;2007年11期

7 孫少陵;GPRS技術特點及其應用[J];電信技術;2002年03期

8 黃宇紅,孫少陵;通用分組無線業務(GPRS)[J];電信科學;2000年05期

9 嚴太山;崔杜武;陶永芹;;基于改進遺傳算法的配電網故障定位[J];高電壓技術;2009年02期

10 賈浩帥;鄭濤;趙萍;郭昆亞;張晉芳;;基于故障區域搜索的配電網故障定位算法[J];電力系統自動化;2012年17期

，

本文編號：1909101