負極材料預處理對鋰離子電池性能的影響
本文選題:鋰離子電池 + 負極粉料; 參考:《電源技術》2014年10期
【摘要】:鋰離子電池的制造工藝技術要求非常嚴格,在電池制作過程中,會根據實際情況對生產工藝進行相應的調整和改進。負極材料是影響電池性能的主要因素之一,關于負極材料的預處理很重要。對負極粉料合漿前的預烘烤工藝進行了研究,實驗結果顯示對于水系負極制作的電池,負極粉料不烘烤對各方面性能影響不大。
[Abstract]:The manufacturing technology of Li-ion battery is very strict. In the process of battery manufacture, the production process will be adjusted and improved according to the actual situation. Negative electrode material is one of the main factors affecting battery performance, and the pretreatment of negative electrode material is very important. The pre-baking process of anode powder before slurry blending was studied. The experimental results showed that the non-baking of anode powder had little effect on the performance of the battery made of negative electrode in water system.
【作者單位】: 合肥國軒高科動力能源股份公司工程研究院;
【分類號】:TM912
【參考文獻】
相關期刊論文 前1條
1 馬軍旗,胡成秋;提高鋰離子電池炭負極材料性能的表面處理方法[J];炭素技術;2000年05期
【共引文獻】
相關期刊論文 前10條
1 俞政洪,吳鋒,任旭梅;鋰離子電池碳負極材料的研究(1)——鍍膜對碳材料電化學性能的改善[J];電池;2002年S1期
2 崔振宇,楊紹斌,于繼甫,王鳳琴,張良均;鋰離子電池石墨負極材料的改性方法[J];電池;2003年06期
3 萬傳云;吳敏昌;李輝;李念民;張殿浩;;殼核結構改性天然石墨在電池中的應用[J];電池工業;2006年03期
4 徐甲強;張海林;李超;樊彥良;;氧化錫的硝酸氧化法制備及其性能研究[J];電池工業;2007年05期
5 陳猛;李金媛;金江敏;;瀝青包覆天然石墨的制備及性能研究[J];電池工業;2007年05期
6 鄧敏超;鋰離子電池負極材料研究進展[J];婁底師專學報;2003年02期
7 綦瑞萍;楊紹斌;王鳳琴;;瀝青包覆石墨用作鋰離子電池負極材料的研究[J];炭素;2007年02期
8 章小康;鐘暉;戴艷陽;;VB摻雜改善石墨電池負極材料的基礎研究[J];稀有金屬與硬質合金;2008年03期
9 杜翠薇,趙煜娟,吳蔭順,劉慶國;熱處理改進天然石墨的電化學性能[J];應用化學;2002年08期
10 王坤;趙洪;劉大凡;安峰;張s,
本文編號:1848526
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/1848526.html