本文選題：LED光源電子驅動器　切入點：高功率　出處：《上海交通大學》2014年碩士論文

【摘要】：LED光源照明如今在全球發展迅猛。由于LED光源照明系統壽命長、可靠性高、節能和易于智能控制等優點,已經取代了大量的傳統照明。作為L(zhǎng)ED光源照明系統中核心部件之一的LED光源電子驅動器,其性能與電氣參數的設計也顯得非常重要。它的設計好壞也將直接影響到整個LED光源照明系統是否能夠體現其優勢的關鍵。現今整個LED光源照明市場的競爭異常激烈,大部分LED光源電子驅動器的功率受產品自身成本和可靠性的壓力,輸出功率普遍不是太高,大部分都在100W以下。這在一些需要高亮度照明的應用場合就會受到很多的條件制約,不利于產品參與市場競爭。另一方面,由于全球各國基礎設施的差異及其法律法規,標準體系的差異所形成技術壁壘,往往使很多LED光源電子驅動器的制造商只能針對某一國家的特定市場來進行產品的研發設計去符合該市場的需求。這種單一性,針對性較強的產品,局限性也很明顯,市場競爭力較弱,往往不利于去開拓其它國家的市場。本文提出了設計一款能滿足全球市場準入的高功率(150W)LED光源電子驅動器產品的可行性。從全球主要的兩大標準體系(一是以美國為主的北美國家,另一個是以國際電工技術委員會會IEC為主的全球大部分國家)對兩者所頒發的針對LED光源電子驅動器產品的法律法規和安全規范出發,如電磁兼容、輸入電流諧波和產品安全設計之間的差異和具體要求進行闡述和分析,最后決定采用了濾波線路,有源功率因數校正線路和LLC諧振軟開關線路的設計方案。然后進一步對相關電子線路的工作原理和產品安全設計的要求進行了詳盡的分析和電氣參數進行設計。最終設計出的150W高功率LED光源電子驅動器通過了該類產品所規定的相關測試,以成功的測試結果來驗證該產品的最終設計是符合到預期的設計要求,是一款可以參與全球市場競爭的高功率LED光源電子驅動器。
[Abstract]:LED lighting is developing rapidly all over the world.Because of the advantages of long life, high reliability, energy saving and easy intelligent control, LED lighting system has replaced a large number of traditional lighting.As one of the core components of the LED lighting system, the design of the performance and electrical parameters of the LED light source electronic driver is also very important.Its design will also directly affect the whole LED lighting system can reflect its advantages or not the key.Nowadays, the competition of the whole LED lighting market is very fierce. Most of the power of LED light source electronic driver is under the pressure of product cost and reliability, the output power is generally not too high, most of them are below 100W.This will be restricted by a lot of conditions in some applications that need high brightness lighting, which is not conducive to the participation of products in market competition.On the other hand, due to the differences in infrastructure, laws and regulations, and the differences in standards systems,Often, many manufacturers of LED light source electronic drives can only develop and design their products in a specific market in a given country to meet the needs of that market.This kind of single, pertinence product, the limitation is also very obvious, the market competition ability is weaker, often is unfavorable to open up the market of other countries.This paper presents the feasibility of designing a high power 150WN LED light source electronic driver which can satisfy the global market access.From the two major standards systems in the world (the first is the North American country, which is dominated by the United States),The other is that most of the world's countries, dominated by the International Electrotechnical Commission (IEC), issue laws, regulations and safety regulations for LED light source electronic driver products, such as electromagnetic compatibility.The difference between the input current harmonics and the safety design of the product is expounded and analyzed. Finally, the design scheme of filter circuit, active power factor correction line and LLC resonant soft switch circuit is decided.Then the working principle of related electronic circuits and the requirements of product safety design are analyzed in detail and electrical parameters are designed.Finally, the 150W high power LED light source electronic driver has passed the relevant tests stipulated by this kind of product, and the final design of the product is verified to meet the expected design requirements with the successful test results.Is a high-power LED light source electronic driver that can participate in the global market competition.
【學位授予單位】：上海交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM923.34

【參考文獻】

相關期刊論文 前3條

1 陳煒?lè)?劉偉蓮;周香;;電磁兼容及其測試技術[J];電子測量技術;2008年01期

2 姜媛媛,李振璧;軟開關技術的發展及其現狀[J];煤礦機械;2005年11期

3 蔣蕓;鮑麗莎;曹正東;;發光二極管的特性研究[J];實驗室研究與探索;2007年06期

相關碩士學位論文 前1條

1 齊德明;單相有源功率因數校正電路的研究與設計[D];山東大學;2008年

，

本文編號：1725050