本文選題：室內照明　切入點：WIFI通信　出處：《杭州電子科技大學》2014年碩士論文

【摘要】：近年來，隨著物聯網技術的不斷發展智慧城市、智能家居等概念已被越來越多的人所熟知。本文設計的基于WIFI的室內LED照明系統就是物聯網產業重要成果之一。整個系統主要由手機客戶端和系統控制終端兩部分組成：其中，手機客戶端用來實現用戶需求的界面功能，系統控制終端一方面用于實現對LED燈的基本操作，如開燈、關燈、調光、密碼修改等；另一方面則用于實現WIFI設備基本參數修改功能，如網絡名稱、密碼等。 本文重點研究內容為系統終端WIFI通信及ATmega8單片機控制功能的實現過程。系統終端主要由三個部分組成：WIFI無線通信模塊RT5350、ATmega8單片機、可調光LED恒流驅動器。其中，，WIFI無線收發模塊主要負責手機客戶端與系統終端單片機控制設備間的數據交換功能，是用戶和LED燈之間實現無線通信的橋梁。系統的控制部分是交由ATmega8單片機來實現的，其作用是處理系統終端通過WIFI模塊接收過來的具體指令信息，即對數據包中的相應命令進行解析并執行�？烧{(diào)光LED恒流驅動器是由AC-DC恒壓源和帶有PWM調光功能的恒流源組成，是終端LED燈、WIFI模塊、ATmega8單片機的供電設備。 最后，通過WIFI模塊和ATmega8單片機成功實現了系統數據的無線收發與控制的過程,并分別對系統整體通信性能和LED恒流驅動性能進行了全面測試。測試結果表明系統數據傳輸穩定，反應靈敏，具有較好的信息交換效應，能夠達到設計的最終要求。另外，LED驅動器功率因數（PF）、效率（）、輸出電壓（Vo）、輸出電流(Io)等也均能達到事先預定的指標，電路工作穩定，使用正常。
[Abstract]:In recent years, with the continuous development of Internet of things technology, intelligent cities, The concept of smart home has been known by more and more people. The indoor LED lighting system based on WIFI is one of the important achievements of the Internet of things industry. The whole system is mainly composed of mobile phone client and system control terminal. On the one hand, the system control terminal is used to realize the basic operation of LED lamp, such as turning on light, turning off light, dimming light, modifying password and so on. On the other hand, it is used to modify the basic parameters of WIFI device, such as network name, password and so on. This paper focuses on the realization process of WIFI communication and the control function of ATmega8 MCU. The system terminal consists of three parts: RT5350ATmega8 single chip microcomputer, the wireless communication module RT5350and ATmega8, which is composed of three parts. Tunable LED constant current driver. The WiFi wireless transceiver module is mainly responsible for the data exchange function between the mobile phone client and the system terminal MCU control device. It is a bridge between user and LED lamp to realize wireless communication. The control part of the system is realized by ATmega8 single chip computer. Its function is to process the specific instruction information received by the system terminal through WIFI module. The tunable LED constant current driver is composed of AC-DC constant voltage source and constant current source with PWM dimming function. It is the power supply equipment of terminal LED lamp wifi module and ATmega8 single chip microcomputer. Finally, the wireless transceiver and control process of the system data is realized successfully by WIFI module and ATmega8 single chip microcomputer. The overall communication performance of the system and the constant current drive performance of LED are tested respectively. The test results show that the system is stable in data transmission, sensitive in response and has good information exchange effect. In addition, the power factor, efficiency, output voltage and output current of the LED driver can reach the predetermined target, the circuit is stable and in normal use.
【學位授予單位】：杭州電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM923.34;TN92

【參考文獻】

相關期刊論文 前10條

1 曾磊;張海峰;侯維巖;;基于WiFi的無線測控系統設計與實現[J];電測與儀表;2011年07期

2 沈紅雷;陳夠喜;伍玉良;;基于Android系統終端實現3G WIFI無線漫游[J];電腦開發與應用;2011年03期

3 王為學;谷剛;;基于Android和Wifi的智能點菜終端設計與實現[J];電腦開發與應用;2011年12期

4 路秋生;;LED調光的實現與有關問題[J];電子質量;2011年03期

5 程安寧;王晉;尚相榮;;白光LED的PWM驅動方式分析[J];電子設計工程;2010年02期

6 姜薇艷;盛衛鋒;;基于LM3402的LED調光電路設計[J];電子設計工程;2011年01期

7 李倩;;LED調光控制技術在飛機導光板照明中的應用[J];測控技術;2010年11期

8 孔文;;LED調光設計思考:可控硅vs PWM[J];集成電路應用;2010年11期

9 王斌;王春毅;;WiFi無線通信定位技術在露天礦中應用研究[J];金屬礦山;2011年07期

10 周曉偉;蔡建平;鄭增威;應晶;;新型室內照明智能控制系統的研究與實現[J];計算機應用研究;2009年08期

本文編號：1653201