本文關鍵詞：一種基于參數修正的區域性電網狀態估計改進方法　出處：《上海交通大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 狀態估計 提高合格率 日常維護 參數修正

【摘要】：電力系統狀態估計是依據調度自動化系統的遙測遙信信息,模擬出系統完備的運行狀態。它可以檢驗開關狀態的位置,修正誤差數據,模擬出比自動化系統遙測數據更精確的運行方式。也能模擬出未裝量測裝置的潮流,以及一些很難量測的電氣量。狀態估計為調度運行人員掌握整個系統運行提供了更準確的平臺,并且還為一些其它高級應用軟件鋪設了完整實時系統運行方式。本文基于上海電力公司“三集五大”建設的背景下,從上海市北供電公司調控中心狀態估計等高級應用運行和日常維護的現狀出發,整理出對于各類不同影響到狀態估計運行的情況所應對的處理方法。同時,針對狀態估計參數存在誤差的情況,給出了一套狀態估計參數修正的方法,對于辨識及檢測系統中的誤差數據,補充缺失量測點數據,提高狀態估計合格率以及改進SCADA量測的正確性和合理配置有十分明顯的作用。通過提高狀態估計合格率,提升了其它相關高級應用功能的準確率,不但為調度員解決分析系統中發生的各種問題,并對系統的運行趨勢作出預測起到良好的幫助,還有助于遠動運行值班同志依據狀態估計計算得到的結果改善和維護自動化系統的缺陷部分。確保了電力系統的安全和經濟運行,為三集五大的順利建設添加了重要的砝碼。
[Abstract]:Power system state estimation is based on the telemetry remote signal information of the dispatching automation system to simulate the complete operation state of the system. It can check the position of the switching state and correct the error data. It can also simulate the power flow of unloaded measuring devices by simulating a more accurate operation mode than the automatic system telemetry data. State estimation provides a more accurate platform for dispatchers to master the operation of the whole system. This paper is based on the background of "three sets and five big" construction of Shanghai Electric Power Company. Starting from the current situation of advanced application operation and daily maintenance such as regulation center state estimation of Shanghai Bei Power supply Company, this paper puts forward the methods to deal with various kinds of situations that affect the operation of state estimation. At the same time. In view of the error of the state estimation parameters, a set of state estimation parameters correction method is presented, which can supplement the missing measurement data for the error data in the identification and detection system. It is very important to increase the qualified rate of state estimation and to improve the correctness and reasonable configuration of SCADA measurement. By increasing the qualified rate of state estimation, the accuracy of other related advanced application functions is improved. Not only for dispatchers to solve all kinds of problems that occurred in the analysis system, but also for the system to predict the running trend of good help. It is also helpful to improve and maintain the defect part of the automation system and ensure the safety and economic operation of the power system. It adds important weights for the smooth construction of three sets and five major projects.
【學位授予單位】：上海交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM734

【參考文獻】

相關期刊論文 前2條

1 劉浩, 侯博淵;保留非線性的快速P－Q分解狀態估計法[J];電力系統自動化;1995年01期

2 李響,劉玲群,郭志忠;抗差最小二乘法狀態估計[J];繼電器;2003年07期

，

本文編號：1414559