本文關鍵詞：數字繼電保護測試儀檢測裝置的研制　出處：《南昌航空大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 數字繼電保護測試儀 IEC61850 非同步采樣 FFT 納塔爾窗

【摘要】：近年來，由于電子式互感器以及斷路器等智能化裝置的應用，加速了智能變電站的發展進程。使得變電站信息的采集、傳輸、處理過程實現了數字化，繼電保護裝置也實現了數字化光纖通信，對新型繼電保護裝置的檢測也提出了新的要求。基于DL/T860標準的數字式繼電保護測試儀的開發與應用有助于提高繼電保護測試水平、防止繼電保護及安全自動裝置不正確動作，對保障電網安全穩定的運行有著重要的現實意義。為了實現對數字繼電保護裝置進行檢測，數字繼電保護測試儀應運而生，而國內尚無對數字繼電保護測試儀進行檢測的裝置，因此開展對數字繼電保護測試儀的檢測裝置的研究具有重要的意義。 本課題設計并研制出數字繼電保護測試儀檢測裝置，該裝置不僅可以完成12路模擬小信號的檢測，也能夠完成符合IEC61850-9-1、IEC61850-9-2LE、IEC61850-9-2協議采樣值的解析。實現了12路小信號以及符合IEC61850協議采樣值各通道數據的幅度、頻率、相位的測量及波形顯示，完成了對數字繼電保護測試儀主要功能的檢測。小信號檢測模塊以DSP處理器TMS320F2812為核心處理器，采用高精度A/D芯片ADS8556，使用非同步采樣方法實現信號的采集，采集到的數據傳至上位機，由上位機進行數據的處理和運算。IEC61850采樣值解析采用光電交換機，實現了光電信號的轉換，使用可視化開發工具Delphi調用WinPcap函數完成了網卡數據的抓包捕獲工作。在數據處理上采用了4項5階Nuttall窗插值算法實現了對FFT的運算結果的修正，達到了更高的精度。 本文首先對課題的研究意義和數字繼電保護裝置的現狀進行了介紹，詳細講述了數字繼電保護測試儀檢測裝置的實現過程，其次對IEC61850協議進行了詳細介紹，并詳細介紹了4項5階Nuttall窗插值算法。結合硬件原理圖對硬件電路進行了分析，，軟件部分則給出了程序流程圖，對抓包和采樣值的解析作了詳細介紹。最后提出系統的不足之處，提出改進意見來進一步完善和改進系統。
[Abstract]:In recent years, the application of electronic transformer and circuit breaker accelerates the development of intelligent substation, which makes the collection, transmission and processing of substation information digitized. The relay protection device also realizes the digital optical fiber communication. The development and application of digital relay protection tester based on DL/T860 standard is helpful to improve the test level of relay protection. To prevent the incorrect action of relay protection and safety automatic device, it has important practical significance to ensure the safe and stable operation of power network. In order to realize the detection of digital relay protection device. Digital relay protection tester emerges as the times require, but there is no testing device for digital relay protection tester in China. Therefore, it is of great significance to study the testing device of digital relay protection tester. This project designs and develops the digital relay protection tester detection device, which can not only complete 12 analog small signal detection, but also complete the IEC61850-9-1. IEC61850-9-2LE. IEC61850-9-2 protocol sample value analysis. 12 channels of small signal and consistent with the IEC61850 protocol sampling value of each channel data amplitude, frequency, phase measurement and waveform display. The main functions of the digital relay protection tester are tested. The small signal detection module takes DSP processor TMS320F2812 as the core processor. The high precision A / D chip ADS8556 is used to collect the signal, and the collected data is transmitted to the upper computer. The data processing and operation by upper computer. IEC61850 sampling value analysis using photoelectric switch to achieve the conversion of photoelectric signals. The data capture of the network card is accomplished by calling the WinPcap function with the visual development tool Delphi. In the data processing, 4 items and 5 order Nuttall window interpolation algorithms are used to realize the implementation of the data acquisition. The correction of the result of FFT operation. Higher accuracy has been achieved. In this paper, the research significance of the subject and the status quo of digital relay protection device are introduced, and the realization process of the digital relay protection tester is described in detail. Secondly, the IEC61850 protocol is introduced in detail, and four five-order Nuttall window interpolation algorithms are introduced in detail, and the hardware circuit is analyzed in combination with the hardware schematic diagram. In the software part, the program flow chart is given, and the analysis of the grasping packet and the sampling value is introduced in detail. Finally, the deficiency of the system is put forward, and the improvement suggestions are put forward to further perfect and improve the system.
【學位授予單位】：南昌航空大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM774

【參考文獻】

相關期刊論文 前10條

1 殷志良,劉萬順,楊奇遜,秦應力,林達;基于IEC 61850標準的采樣值傳輸模型構建及映射實現[J];電力系統自動化;2004年21期

2 陳國志;陳隆道;蔡忠法;;基于Nuttall窗插值FFT的諧波分析方法[J];電力自動化設備;2011年04期

3 解德英;謝品芳;付志紅;鄭可;;電網工頻信號非整周期采樣誤差分析[J];電子測量與儀器學報;2010年02期

4 孫宏偉,李梅,袁健華,寇曉,李彥明;用于電力系統諧波分析的加窗插值FFT算法研究[J];高電壓技術;2004年08期

5 白潔;;用Wireshark抓包分析幀格式[J];電腦知識與技術;2011年28期

6 李曉菲;張靜;;基于ADS8556的六通道高速數據采集系統設計[J];今日電子;2012年07期

7 邱海鋒;周浩;;非同步采樣下電網諧波分析方法的探討[J];繼電器;2008年01期

8 鄭新才;施魯寧;楊光;劉繼安;;IEC61850標準下采樣值傳輸規范9-1、9-2的對比和分析[J];電力系統保護與控制;2008年18期

9 王瑞雪;王開宇;李忠安;;IEC61850-9-2數據收發測試的探索[J];江蘇電機工程;2011年03期

10 劉詩俊;羅藝;;基于WinCap的UDP協議數據重發方法[J];計算機與數字工程;2009年08期

本文編號：1399025