為了滿足能源需求,最合適的方法之一是將可再生能源滲透到當前的電力系統中。通過集成可再生分布式發電機（DG）（例如太陽能系統）,風力渦輪機在當今非常出名。最近,太陽能因光伏組件成本的降低、技術的進步、及各國對該領域的支持而廣受贊譽。但將DG大規模集成到電力系統時,也存在一些缺點。其中一點是由于高滲透率導致的電力系統可靠性。電壓穩定性是關鍵的問題之一。通過考慮不同國家預先定義的低壓穿越（LVRT）要求,本文主要對電網集成光伏系統中的短期電壓穩定性進行了分析。在論文的第一部分中,本文中開發了一種適用于考慮故障穿越（FRT）控制技術的短期電壓穩定性分析的光伏發電系統模型,并且設計了一種太陽能電池模型。其目的是保證光伏系統在電網側發生任何故障或電壓驟降期間穿越系統時都可以保持連接狀態。電壓穩定性的分析主要是為了檢查故障期間負載注入下的系統性能。電壓穩定性與負載動態的關系更大,因此在電壓穩定性分析中應考慮不同的負載特性。論文第二部分的主要內容是研究光伏發電系統并網過程中的特性和沒有故障或電壓驟降時的系統性能。本文所開發的策略還將執行最大功率點跟蹤（MPPT）功能,該功能在DC-DC轉換器中實現。當... 

【文章來源】：哈爾濱工業大學黑龍江省 211工程院校 985工程院校

【文章頁數】：81 頁

【學位級別】：碩士

【文章目錄】：
摘要
Abstract
Chapter1:Introduction
    1.1.Solar energy-An alternative energy Source
    1.2.Background and significance of topic
        1.2.1.Background
        1.2.2.Significance of topic
    1.3.Objective of thesis
    1.4.Literature review
    1.5.Outline of the thesis
Chapter2:Modeling of Photovoltaic array,characteristics analysis and overview to grid-tied PV systems
    2.1.Introduction
    2.2.Photovoltaic cell-A brief history
    2.3.Types of Photovoltaic cells
    2.4.PV Generator
    2.5.Modeling of PV array
        2.5.1.PV cell mathematical model(real/ practical cell scenario)
        2.5.2.MATLAB/Simulink model of Photovoltaic cell
        2.5.3.Analysis of characteristics of the photovoltaic array
    2.6.Maximum Power Tracking Control(MPPT)
        2.6.1.Perturb and Observe Methods
        2.6.2.Incremental Conductance
        2.6.3.Fuzzy Logic Control
    2.7.Overview to grid-tied PV system
        2.7.1.Photovoltaic energy generation network
        2.7.2.Grid-Connoted PV System and its components
        2.7.3.Three-phase voltage source inverter with filters
        2.7.4.Two-Stage inverter topology
    2.8.Structure and Topologies of grid-connected PV inverters
    2.9.Summary
Chapter3:Fundamentals of grid-connected PV control systems,grid integration challenges and factors effecting Voltage Stability
    3.1.Introduction
    3.2.Fundamentals Grid-connected PV system
    3.3.Standards for grid interfacing
        3.3.1.Grid codes
        3.3.2.Fault ride-though(FRT)technique
    3.4.Integration challenges
        3.4.1.Influence of PV services on generation sides
        3.4.2.Effect on transmission and sub-transmission networks
        3.4.3.Impact on distribution networks
    3.5.Types of PV systems
    3.6.Performance of grid-connected Photovoltaic systems
        3.6.1.Specifications for Grid-connected PV efficiency analysis
    3.7.Power system stability analysis with high PV penetration
        3.7.1.Categorization of stability of power systems
    3.8.Grid faults
        3.8.1.Simulink test system for fault analysis
        3.8.2.Simulation results
    3.9.Conclusion
Chapter4:Short-term Voltage stability analysis on grid-connected PV System
    4.1.Introduction
    4.2.Two-Stage grid-connected PV system model
    4.3.Voltage Stability an overview
        4.3.1.Long-term voltage stability
        4.3.2.Short-term(ST)voltage stability
    4.4.Dynamic behavior of PV System on Short-term voltage stability
        4.4.1.Load Modelling
        4.4.2.Induction motor(IM)
    4.5.Test System
    4.6.Dynamic voltage support for Low voltage ride-through(LVRT)
        4.6.1.Voltage Sag or Dip/Fault Detection Methods
        4.6.2.Simulink established fault detection model using equation(4.11)
        4.6.3.DC-Link voltage control
    4.7.Simulation Results for Short-term Voltage stability analysis
    4.8.Summary
    4.9.Conclusions and Future Work
References
攻讀碩士學位期間發表的論文及其它成果
Acknowledgement



本文編號：3486187