發布時間：2019-06-14 10:53

【摘要】：切除過載支路可能會引發相關輸電斷面內連鎖過載,應在過載保護延時動作時限內,采取快速控制措施消除過載。文中保護對象為斷面整體,保證降低斷面整體潮流的同時斷面內無支路過載�，F(xiàn)有改進算法的綜合靈敏度計算或忽略正常支路,或僅為過載線路及接近極限線路靈敏度的代數和,不能更為合理地體現節點消除斷面整體過載的能力;且其節點優先級劃分及調整節點對選擇、調整量約束條件仍不完善。文中繼承了現有綜合靈敏度算法的總體思想并加以改進,認為綜合靈敏度應為斷面內過載支路與正常支路靈敏度的加權和,以此對控制節點進行分類和排序;劃分節點優先級時綜合考慮節點對支路的靈敏度及斷面的綜合靈敏度;根據反向等量配對法選擇調整節點對時增加"保證斷面整體安全"原則,且增加平衡機出力的處理避免越限;完善調整量約束條件,加入潮流反向約束避免調整量過大時潮流反向增長。對某省電網系統的仿真計算表明了算法的快速有效性。
[Abstract]:The removal of overload branch may lead to chain overload in the relevant transmission section, so fast control measures should be taken to eliminate overload within the time limit of overload protection delay operation. In this paper, the protection object is the whole section to ensure that the overall power flow of the section is reduced and there is no branch overload in the section. The comprehensive sensitivity calculation of the existing improved algorithm either ignores the normal branch, or is only the algebra sum of the sensitivity of the overload line and the limit line, which can not more reasonably reflect the ability of the node to eliminate the overall overload of the section, and the node priority division and the adjustment of the node pair selection, the adjustment constraint conditions are still not perfect. In this paper, the overall idea of the existing comprehensive sensitivity algorithm is inherited and improved, and it is considered that the comprehensive sensitivity should be the weighted sum of the sensitivity of the overload branch and the normal branch in the section, so as to classify and sort the control nodes, and consider the sensitivity of the node to the branch and the comprehensive sensitivity of the section when dividing the priority of the nodes. According to the reverse equal matching method, the principle of "ensuring the overall safety of the section" is added when the node pair is adjusted, and the output of the balancer is increased to avoid exceeding the limit; the constraint conditions of the adjustment quantity are improved, and the reverse constraint of the power flow is added to avoid the reverse growth of the power flow when the adjustment quantity is too large. The simulation results of a provincial power grid system show that the algorithm is fast and effective.
【作者單位】： 西安交通大學電氣工程學院;國家電網許繼集團有限公司;
【基金】：國家電網公司科技項目“適應變電站-網架形態演變趨勢的新架構保護關鍵技術研究與開發”~~
【分類號】：TM744

【相似文獻】

相關期刊論文 前4條

1 謝麗;一種實用的綜合靈敏度計算法[J];遼寧工學院學報;2001年01期

2 李恩顯，熊大蓮，，莊金銓，朱巖;超聲多普勒胎心儀最大綜合靈敏度標準測量裝置[J];現代計量測試;1995年05期

3 代飛;崔挺;徐箭;孫元章;;基于綜合靈敏度分析的電壓校正控制[J];電力自動化設備;2011年12期

4 ;[J];;年期

本文編號：2499337