基于MRAS的永磁同步電機參數在線辨識的研究
發布時間：2018-09-14 09:20
【摘要】：隨著現代工業的飛躍式發展,在高精度的工業控制設備中相當多的采用了永磁同步電機(PMSM)以取代寬調速的直流伺服電機,尤其是在新興能源領域,如電動汽車等行業,永磁同步電機的應用十分廣泛。在永磁同步電機伺服控制系統中,電機機械參數會隨著工況的變化而變化,這對系統的控制性能造成了不利的影響。因此,PMSM機械參數的在線辨識成為高精度控制的要求,并且,傳統的調節器因不能隨工況的改變進行參數自校正,從而使系統的穩定性和抗擾性變差,因此調節器的自適應能力也是伺服控制系統的發展要求。模型參考自適應(MRAS)作為自適應方法的一個重要分支,在工業上的應用逐漸成熟。目前,國內外都在積極研究將模型參考自適應方法引入到電機控制中。模型參考自適應的原理簡單,辨識精度高,易于實現。本文在充分研究模型參考自適應理論的基礎上采用離散模型參考控制方案,基于MRAS展開對永磁同步電機參數在線辨識與轉速自適應控制理論的研究。主要研究?jī)?nèi)容如下:1、基于TI公司控制型芯片TMS320F28335設計PMSM矢量控制系統,分別建立了電流環、速度環的控制模型,完成兩環控制器參數的設計。在系統硬件電路和軟件程序的基礎上實現電機參數與轉速的在線辨識。2、通過對模型參考自適應控制系統的研究,采用popov超穩定性理論設計電機的參數在線辨識規律,并在矢量控制仿真模型的基礎上設計了電機參數的在線辨識仿真模型。3、對比研究基于MRAS的三相PMSM速度自適應控制系統。提出一種基于無位置傳感器的速度自適應調節器設計方法,克服傳統位置傳感器給控制系統帶來的不利影響。4、搭建系統控制平臺,設計系統硬件電路與軟件程序,為系統實驗提供良好的環境。5、論文通過Matlab/Simulink仿真及PMSM閉環矢量控制系統實驗,對永磁同步電機控制系統進行了建模和仿真,充分證明了本文所提出的參數在線辨識算法能夠快速準確的辨識出電機機械參數及轉速,為電機控制系統性能的進一步提高提供了必要條件,具有十分重要的意義。
[Abstract]:With the rapid development of modern industry, permanent magnet synchronous motor (PMSM) (PMSM) is widely used in high-precision industrial control equipment to replace the wide-speed DC servomotor, especially in the field of emerging energy, such as electric vehicles, etc. Permanent magnet synchronous motor (PMSM) is widely used. In the servo control system of PMSM, the mechanical parameters of PMSM will change with the change of working conditions, which has a negative effect on the control performance of PMSM. Therefore, the on-line identification of mechanical parameters of PMSM becomes the requirement of high precision control, and the traditional regulator can not self-adjust its parameters with the change of working conditions, which makes the stability and immunity of the system worse. Therefore, the adaptive ability of regulator is also the development requirement of servo control system. As an important branch of adaptive methods, model reference adaptive (MRAS) (MRAA) is becoming more and more widely used in industry. At present, the model reference adaptive method is applied to motor control actively at home and abroad. The principle of model reference adaptive is simple, the identification accuracy is high, and it is easy to realize. In this paper, based on the study of model reference adaptive theory, the discrete model reference control scheme is adopted, and the parameters online identification and rotational speed adaptive control theory of permanent magnet synchronous motor are studied based on MRAS expansion. The main research contents are as follows: 1. Based on TI control chip TMS320F28335, the PMSM vector control system is designed. The control models of current loop and speed loop are established, and the parameters of the two loop controller are designed. On the basis of the hardware circuit and software program of the system, the on-line identification of motor parameters and rotational speed is realized. Through the research of the model reference adaptive control system, the on-line identification law of the motor parameters is designed by using the popov hyperstability theory. On the basis of vector control simulation model, the on-line identification simulation model of motor parameters. 3 is designed, and the three-phase PMSM speed adaptive control system based on MRAS is comparatively studied. This paper presents a design method of speed adaptive regulator based on sensorless position sensor, which overcomes the adverse influence of traditional position sensor on the control system. The control platform of the system is built, and the hardware circuit and software program of the system are designed. In this paper, the permanent magnet synchronous motor control system is modeled and simulated by Matlab/Simulink simulation and PMSM closed-loop vector control system experiment. It is fully proved that the proposed on-line parameter identification algorithm can quickly and accurately identify the mechanical parameters and rotational speed of the motor, which provides the necessary conditions for the further improvement of the performance of the motor control system, and has a very important significance.
【學位授予單位】：深圳大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM341
本文編號：2242285
[Abstract]:With the rapid development of modern industry, permanent magnet synchronous motor (PMSM) (PMSM) is widely used in high-precision industrial control equipment to replace the wide-speed DC servomotor, especially in the field of emerging energy, such as electric vehicles, etc. Permanent magnet synchronous motor (PMSM) is widely used. In the servo control system of PMSM, the mechanical parameters of PMSM will change with the change of working conditions, which has a negative effect on the control performance of PMSM. Therefore, the on-line identification of mechanical parameters of PMSM becomes the requirement of high precision control, and the traditional regulator can not self-adjust its parameters with the change of working conditions, which makes the stability and immunity of the system worse. Therefore, the adaptive ability of regulator is also the development requirement of servo control system. As an important branch of adaptive methods, model reference adaptive (MRAS) (MRAA) is becoming more and more widely used in industry. At present, the model reference adaptive method is applied to motor control actively at home and abroad. The principle of model reference adaptive is simple, the identification accuracy is high, and it is easy to realize. In this paper, based on the study of model reference adaptive theory, the discrete model reference control scheme is adopted, and the parameters online identification and rotational speed adaptive control theory of permanent magnet synchronous motor are studied based on MRAS expansion. The main research contents are as follows: 1. Based on TI control chip TMS320F28335, the PMSM vector control system is designed. The control models of current loop and speed loop are established, and the parameters of the two loop controller are designed. On the basis of the hardware circuit and software program of the system, the on-line identification of motor parameters and rotational speed is realized. Through the research of the model reference adaptive control system, the on-line identification law of the motor parameters is designed by using the popov hyperstability theory. On the basis of vector control simulation model, the on-line identification simulation model of motor parameters. 3 is designed, and the three-phase PMSM speed adaptive control system based on MRAS is comparatively studied. This paper presents a design method of speed adaptive regulator based on sensorless position sensor, which overcomes the adverse influence of traditional position sensor on the control system. The control platform of the system is built, and the hardware circuit and software program of the system are designed. In this paper, the permanent magnet synchronous motor control system is modeled and simulated by Matlab/Simulink simulation and PMSM closed-loop vector control system experiment. It is fully proved that the proposed on-line parameter identification algorithm can quickly and accurately identify the mechanical parameters and rotational speed of the motor, which provides the necessary conditions for the further improvement of the performance of the motor control system, and has a very important significance.
【學位授予單位】：深圳大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM341
【參考文獻】
相關期刊論文 前4條
1 李永東;朱昊;;永磁同步電機無速度傳感器控制綜述[J];電氣傳動;2009年09期
2 周衛平;吳正國;唐勁松;劉大明;;SVPWM的等效算法及SVPWM與SPWM的本質聯系[J];中國電機工程學報;2006年02期
3 梁艷,李永東;無傳感器永磁同步電機矢量控制系統概述[J];電氣傳動;2003年04期
4 王偉,張晶濤,柴天佑;PID參數先進整定方法綜述[J];自動化學報;2000年03期
，本文編號：2242285
本文鏈接：http://sikaile.net/kejilunwen/dianlidianqilunwen/2242285.html
最近更新
教材專著
