一種適用于柔性直流配電網的電壓控制策略
發布時間:2018-09-07 10:12
【摘要】:隨著分布式能源的興起和電力電子技術的發展,相比交流配電網,直流配電網擁有更大的發展?jié)摿ΑT撐氖紫葘χ绷髋潆娋W(wǎng)的拓撲結構、控制方法以及模式切換問題進行了闡述。其次,為了有效解決配網系統中復雜的模式切換問題,簡化控制流程和優化潮流控制,文中提出了一種適用于直流配電網的電壓控制策略,該策略使各端電壓源換流站均具有維持電壓和調節功率的能力,其中主站作為功率平衡節點,并為系統提供參考電壓。最后,在PSCAD/EMTDC中建立了雙端和三端直流配電網結構的仿真模型。通過仿真驗證了該直流配電網電壓控制策略的有效性。
[Abstract]:With the rise of distributed energy and the development of power electronics technology, DC distribution network has more potential than AC distribution network. In this paper, the topology, control method and mode switching of DC distribution network are discussed. Secondly, in order to effectively solve the complex mode switching problem in distribution network system, simplify the control flow and optimize power flow control, a voltage control strategy suitable for DC distribution network is proposed in this paper. The strategy makes the terminal voltage source converter stations have the ability to maintain voltage and adjust power. The main station acts as the power balance node and provides the reference voltage for the system. At last, the simulation model of two-terminal and three-terminal DC distribution network is established in PSCAD/EMTDC. The effectiveness of the voltage control strategy is verified by simulation.
【作者單位】: 東南大學電氣工程學院;清華大學電機工程與應用電子技術系;南方電網科學研究院;
【基金】:國家高技術研究發展計劃項目(863計劃)(2015AA050103) 江蘇省產學研前瞻性聯合研究項目(BY2014127-15)~~
【分類號】:TM721.1
[Abstract]:With the rise of distributed energy and the development of power electronics technology, DC distribution network has more potential than AC distribution network. In this paper, the topology, control method and mode switching of DC distribution network are discussed. Secondly, in order to effectively solve the complex mode switching problem in distribution network system, simplify the control flow and optimize power flow control, a voltage control strategy suitable for DC distribution network is proposed in this paper. The strategy makes the terminal voltage source converter stations have the ability to maintain voltage and adjust power. The main station acts as the power balance node and provides the reference voltage for the system. At last, the simulation model of two-terminal and three-terminal DC distribution network is established in PSCAD/EMTDC. The effectiveness of the voltage control strategy is verified by simulation.
【作者單位】: 東南大學電氣工程學院;清華大學電機工程與應用電子技術系;南方電網科學研究院;
【基金】:國家高技術研究發展計劃項目(863計劃)(2015AA050103) 江蘇省產學研前瞻性聯合研究項目(BY2014127-15)~~
【分類號】:TM721.1
【相似文獻】
相關期刊論文 前10條
1 方鴿飛;劉君華;呂巖巖;;基于樹形分布的電壓控制分區[J];電力系統及其自動化學報;2007年01期
2 王彬;郭慶來;孫宏斌;張伯明;李海峰;羅建裕;;雙向互動的省地協調電壓控制[J];電力系統自動化;2010年12期
3 劉利;;電網二級電壓控制的現狀分析和發展方向[J];科技傳播;2010年19期
4 王德清;鄭立瑋;黃清海;;風電無功-電壓控制系統的研究[J];電力與電工;2013年02期
5 盛戈f,
本文編號:2227963
本文鏈接:http://sikaile.net/kejilunwen/dianlidianqilunwen/2227963.html
最近更新
教材專著