【摘要】：隨著IEC61850標準的應用推廣,智能變電站運行水平邁向了更高的層次。在智能變電站中,二次回路由硬接線方式轉變?yōu)樘摶芈贩绞?以過程層信息共享方式解決了原有二次回路的很多問題。然而,當前智能變電站實踐主要聚集在新型裝置和統一報文規范的技術研究,而針對涉及新型模式下的智能變電站運維模式的影響以及全過程的管控方案研究不足,以致目前的智能變電站無法從根本上帶給變電站的運維、安全及經濟方面實在的變化,這就是約束當前智能變電站只是處于“試點”環節的根本問題。針對智能變電站取消硬電纜回路的特點,本文對二次虛回路狀態監測、SCD文件管控等二次設備運維關鍵技術進行了深入的探討和研究。本文首先分析了國內外智能變電站運維的現狀,指出了目前變電站的運維模式存在的問題。在此基礎上,提出了本課題研究的主要內容和方法以及研究的意義。然后闡述了智能變電站的基本結構,根據智能變電站的架構和功能特點分析了二次設備運維系統體系。通過對二次虛鏈路組網形式、可視化監視以及二次回路的物理鏈路拓?fù)浜吞搶?shí)鏈路的映射關系進行研究,利用二次設備虛實回路建模和拓?fù)渥R(shí)別的方法,給二次虛回路狀態監視系統的設計提供數據基礎。接著在SCD文件記錄的與智能變電站安全穩定運行相關的大量關鍵信息(包括變電站一次設備模型與電氣拓?fù)湫畔�、功能視圖、通信視圖、產品視圖、數據流等)的基礎上,根據智能變電站二次虛回路集成配置的SCD文件管控方法,結合實際的模型展開了一定的應用分析。最后,通過現場變電站配置文件對二次設備虛回路狀態監測和SCD文件管控系統進行測試,測試結果表明,該系統能夠?qū)崿F(xiàn)智能變電站通信配置過程的可視化。
[Abstract]:With the application of IEC61850 standard, the operation level of intelligent substation moves to a higher level. In intelligent substation, the secondary circuit is changed from hard wiring mode to virtual circuit mode, and many problems of the original secondary circuit are solved by process layer information sharing. However, the current practice of intelligent substation is mainly focused on the technical research of new devices and unified message specification. However, there is a lack of research on the influence of the operation and maintenance mode of intelligent substation under the new mode and the control scheme of the whole process. As a result, the current intelligent substation can not fundamentally bring substation operation and maintenance, safety and economic aspects of the real changes, this is the restriction of the current intelligent substation is only in the "pilot" link of the fundamental problem. In view of the characteristics of canceling hard cable loop in intelligent substation, the key techniques of secondary equipment operation and maintenance, such as secondary virtual loop state monitoring and SCD file control, are deeply discussed and studied in this paper. This paper first analyzes the present situation of intelligent substation operation and maintenance at home and abroad, and points out the problems existing in the operation and maintenance mode of substation at present. On this basis, the main contents and methods of this research and the significance of the research are put forward. Then the basic structure of intelligent substation is expounded, and the system of secondary equipment operation and maintenance is analyzed according to the structure and function of intelligent substation. Based on the study of the network form of the secondary virtual link, the visual monitoring and the mapping relationship between the physical link topology and the virtual link of the secondary loop, the method of modeling and topology identification of the virtual and real circuit of the secondary equipment is used. It provides the data basis for the design of the secondary virtual loop state monitoring system. Then, on the basis of a large number of key information (including substation primary equipment model and electrical topology information, function view, communication view, product view, data flow, etc.) recorded in the SCD file, which are related to the safe and stable operation of the intelligent substation, and so on. According to the SCD file control method of intelligent substation secondary virtual loop integrated configuration, the application analysis is carried out in combination with the actual model. Finally, the virtual loop state monitoring and SCD file control system of secondary equipment is tested by the substation configuration file in the field. The test results show that the system can realize the visualization of communication configuration process in intelligent substation.
【學位授予單位】：湖北工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM63;TM507

【參考文獻】

相關期刊論文 前10條

1 葉遠波;孫月琴;黃太貴;郭明宇;黃勇;;智能變電站繼電保護二次回路在線監測與故障診斷技術[J];電力系統保護與控制;2016年20期

2 篤峻;葉翔;葛立青;楊貴;周奕帆;;智能變電站繼電保護在線運維系統關鍵技術的研究及實現[J];電力自動化設備;2016年07期

3 秦紅霞;武芳瑛;彭世寬;葛亮;游濤;;智能電網二次設備運維新技術研討[J];電力系統保護與控制;2015年22期

4 周華良;鄭玉平;姚吉文;姜雷;謝黎;王凱;;面向智能變電站二次設備的網絡報文管控技術[J];電力系統自動化;2015年19期

5 卜強生;袁宇波;高磊;張道農;宋亮亮;;智能變電站數字化采樣延時變頻測量方法[J];電力系統自動化;2015年18期

6 樊陳;倪益民;申洪;劉有為;徐明;楊威;;中歐智能變電站發展的對比分析[J];電力系統自動化;2015年16期

7 張巧霞;賈華偉;葉海明;肖亮;李江林;張庭;張道農;;智能變電站虛擬二次回路監視方案設計及應用[J];電力系統保護與控制;2015年10期

8 熊華強;萬勇;桂小智;杜科;葉飛;;智能變電站SCD文件可視化管理和分析決策系統的設計與實現[J];電力自動化設備;2015年05期

9 高磊;石慧;楊毅;曹衛國;;智能變電站配置描述文件管控系統的研究與實現[J];電網技術;2014年12期

10 高翔;楊漪俊;姜健寧;吳振杰;;基于SCD的二次回路監測主要技術方案介紹與分析[J];電力系統保護與控制;2014年15期

，

本文編號：2226308