本文選題：智能變電站　切入點：繼電保護系統　出處：《華北電力大學(北京)》2016年碩士論文　論文類型：學位論文

【摘要】：繼電保護系統是電力系統構成的重要部分之一,它的主要作用是為了在電網中由于各種意外因素產生事故時,能夠及時發出指令,讓斷路器執行開合閘的操作,可以使得電網的安全運行得到保障。傳統變電站與智能變電站在原件和結構有很大的不同。通過對智能變電站中的繼電保護系統進行測試并得到系統運行可靠性的評估報告,可以發現并改進繼電保護系統中所暴露出來的需要改進的地方,讓繼電保護系統能夠更為有效地工作,使得整個電網能夠處在更加安全經濟的工作狀態。在對智能變電站繼電保護系統配置及構成的研究現狀總結分析的基礎上,本文引入GO法更加深入地對智能變電站繼電保護系統的運行可靠性進行計算分析。論文主要包括以下內容：①分析了智能變電站中的保護系統配置及網絡構造,介紹了智能變電站繼電保護系統的主要組成,并與傳統變電站的保護系統進行了對比,著重對兩種變電站的差異進行了介紹。②介紹了GO法的基本理念及和工作原理,重點解釋了存在共有信號的概率算法,提出GO法定量計算公式,在此基礎上建立了基于改進GO法的用來分析繼電保護系統運行是否運行可靠性以及哪種系統更加優異的研究模型。③本文是以220 kV拱東智能變電站保護的構建參考,采用GO法定量計算的方法,分別對主變、線路以及母線保護三種保護系統進行了計算分析,并得出其運行可靠性,通過對計算結果的分析可以得知：線路保護的運行可靠性比于其他保護更高一點,母線保護運行可靠性稍微低一點,主要是因?yàn)樗婕暗碾娖髟噙\(yùn)行可靠性,最后根據計算所得到的運行可靠性分析報告提出具體措施,用以提高繼電保護系統的運行可靠性。
[Abstract]:The relay protection system is one of the important parts of the power system. Its main function is to make the circuit breaker carry out the operation of opening and closing in time when accidents occur due to various unexpected factors in the power network. The traditional substation is different from the intelligent substation in the original part and the structure. By testing the relay protection system in the intelligent substation and obtaining the evaluation report of the system operation reliability, You can identify and improve what needs to be improved in the relay protection system, so that the relay protection system can work more effectively. So that the whole power network can be in a more safe and economical working state. On the basis of the summary and analysis of the configuration and composition of relay protection system in intelligent substation, In this paper, go method is introduced to calculate and analyze the reliability of relay protection system in intelligent substation. The main contents of this paper are as follows: 1. The configuration of protection system and network structure in intelligent substation are analyzed as follows: 1. This paper introduces the main composition of intelligent substation relay protection system, and compares it with the traditional substation protection system. The difference between the two substations is emphatically introduced. 2. The basic concept and working principle of go method are introduced. In this paper, the probabilistic algorithm for the existence of common signals is explained, and the calculation formula of go method is put forward. On this basis, a research model based on improved go method is established to analyze whether the relay protection system is running reliably and which system is more excellent. 3 this paper is a reference for the construction of 220 kV Gongdong intelligent substation protection. By using go method of calculation, the main transformer, circuit and busbar protection system are calculated and analyzed, and the reliability of the system is obtained. Through the analysis of the calculation results, we can know that the operational reliability of line protection is higher than that of other protection, and the operation reliability of bus protection is slightly lower, mainly because it involves too many electrical components. Finally, according to the operational reliability analysis report obtained from the calculation, concrete measures are put forward to improve the operational reliability of the relay protection system.
【學位授予單位】：華北電力大學(北京)
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TM63;TM76;TM77

【相似文獻】

相關期刊論文 前10條

1 洪天p，

本文編號：1594550