【摘要】：通過對之江大橋正交異性鋼橋面板進行數值模擬,對不同U肋間距、傾角、板厚情況下隱蔽焊縫及其周圍區域的應力分布規律和隱蔽焊縫應力監測的適宜區域進行分析。結果表明:U肋翼板與隱蔽焊縫的應力之間具有較好的相關性,橫截面的應力比系數δB受U肋間距、U肋與翼板角度及橋面板與U肋厚度比等參數變化的影響無明顯規律;可以通過U肋翼板應力換算得到隱蔽焊縫應力,且δB與測點至焊縫的距離有關,U肋翼板1/4高度以下區域為隱蔽焊縫應力監控的適宜區域。
[Abstract]:Based on the numerical simulation of orthotropic steel bridge deck of Zhijiang Bridge, the stress distribution law of hidden weld and its surrounding area under different U-ribbed spacing, inclination angle and plate thickness and the suitable area for stress monitoring of hidden weld are analyzed. The results show that there is a good correlation between the stress of U-ribbed wing plate and hidden weld. The stress ratio coefficient 未 B of cross section is not affected by the variation of U-ribbed spacing, U-ribbed and wing angle and bridge deck to U-ribbed thickness ratio. The hidden weld stress can be obtained by the stress conversion of U ribbed wing plate, and 未 B is related to the distance from the measuring point to the weld seam. The area below the height of U ribbed wing plate 1 鈮，

本文編號：2506830