【摘要】：在橋梁水平位移監測中,基于當前高鐵橋梁不規則線型增多的情況,針對傳統精度分析方法只能掌握監測點沿橋梁中軸線垂直方向的偏差且是基于簡易誤差傳播理論,而施工監測中需掌握沿某特定方向的精度。因此,結合跨淮河某橋梁,創新采用誤差橢圓理論對小角法、角度交會法、距離交會等監測方法進行精度評定,結果認為小角法對于曲線橋梁適用性較差,而后方交會和極坐標組合方法能夠產生較小的誤差橢圓和點位精度,期望結論對相關橋梁工程有所借鑒。
[Abstract]:In the horizontal displacement monitoring of bridges, based on the increase of irregular lines of high-speed railway bridges, the traditional accuracy analysis method can only master the vertical deviation of monitoring points along the central axis of the bridge and is based on the simple error propagation theory, but the accuracy along a specific direction should be mastered in construction monitoring. Therefore, combined with a bridge across the Huaihe River, the error ellipse theory is used to evaluate the accuracy of small angle method, angle intersection method, distance rendezvous and other monitoring methods. The results show that the small angle method has poor applicability to curved bridges, while the rear intersection and polar coordinate combination method can produce less error ellipse and point accuracy. It is expected that the conclusion can be used for reference in related bridge engineering.
【作者單位】： 宿遷學院建筑工程學院;東南大學交通學院;
【基金】：江蘇省科技支撐(工業)項目(BE2014026) 江蘇省高校自然科學研究項目(13KJB420004)
【分類號】：U446

【相似文獻】

相關期刊論文 前3條

1 顧維勤;對《關港挖入式內河港池開挖階段板樁駁岸位移監測》一些觀點的分析[J];水運工程;1992年05期

2 陳熙祥;隧洞貫通設計精度評定的簡易方法[J];浙江水利水電專科學校學報;1999年01期

3 ;[J];;年期

，

本文編號：2506535