基于EDEM的瀝青混合料攪拌仿真研究
[Abstract]:Agitator is the core working device of batch mixing equipment. Whether mixture mixing is uniform or not will directly affect the production quality and efficiency of asphalt mixture. The study of mixing process through simulation technology is not only beneficial to the study of mixing theory of asphalt mixture, but also can be used to evaluate the performance of agitator scientifically and effectively by adjusting different parameters. In this paper, the mixing process of asphalt mixture under different working conditions is simulated by using indoor mixer model. On the basis of mixing mechanism, this paper analyzes the mixing process of asphalt mixture. The factors influencing the mixing uniformity of asphalt mixture are studied. The results show that the mixing uniformity of asphalt mixture can be ensured only by selecting reasonable rotational speed, filling rate and stirring time. In order to ensure the homogeneity of agitator, the different parameters of agitator must be compared and studied. The agitator in the indoor mixer is modeled by Creo2.0, and the mixing system under different mixing parameters is simulated by the discrete element simulation software EDEM, and the mixture mixing uniformity is analyzed according to the simulation results. The mixture has the best mixing uniformity when the filling ratio is 30 and the rotational speed is 75rpm. The mixture mixed with granular modifier was stirred and simulated, and the uniformity of particle size distribution in the mixture was analyzed under different rotational speeds, and whether the mixed particle type modifier affected the uniform distribution of particle size was analyzed. Using the surface energy between asphalt and aggregate, the JKR contact model with binder function is compiled by API through EDEM, the simulation analysis of asphalt mixture is carried out, and the uniformity of asphalt mixture is verified under this condition. The results show that the "wet mixing" has better homogeneity than the "dry mixing" with large particles under these conditions.
【學位授予單位】:長安大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:U414
【參考文獻】
相關期刊論文 前10條
1 呂興坤;王新亞;董晨希;趙悟;;基于EDEM的寬短型雙臥軸攪拌機較優返回葉片數量的研究[J];機械研究與應用;2016年03期
2 曹鑫鑫;徐超;;基于EDEM的穩定土攪拌機攪拌裝置的優化研究[J];建設機械技術與管理;2016年03期
3 董玉剛;;混凝土水泥砂漿法預拌時間的仿真研究[J];建設機械技術與管理;2016年02期
4 陳新軒;張清偉;張新勇;陳宏業;;基于EDEM的穩定土攪拌均勻性研究[J];筑路機械與施工機械化;2015年11期
5 王振鵬;李耀;謝東;趙悟;;基于EDEM的一種立式混合型攪拌裝置的應用研究[J];機械研究與應用;2015年04期
6 馮忠緒;趙利軍;陳衛;張良奇;;攪拌設備設計講座(第二十講) 1m~3雙臥軸混凝土振動攪拌機[J];工程機械;2014年04期
7 李奇;張旭;潘旭磊;;基于ANSYS的對置式雙臥軸攪拌器工作裝置的分析[J];建設機械技術與管理;2014年02期
8 許延祜;;拌和工藝對澆注式瀝青混合料性能的影響研究[J];北方交通;2013年10期
9 王超;;離散系數的一種改進方法[J];統計與咨詢;2010年03期
10 何華;;淺析我國瀝青攪拌設備的現狀和發展趨勢[J];科技創新導報;2009年25期
相關博士學位論文 前2條
1 趙悟;攪拌裝置參數優化的研究[D];長安大學;2005年
2 趙永利;瀝青混合料的結構組成機理研究[D];東南大學;2005年
相關碩士學位論文 前10條
1 龐驍奕;基于AFM與表面能原理的瀝青與集料粘附特性分析[D];哈爾濱工業大學;2015年
2 趙青龍;攪拌工藝對瀝青混合料攪拌均勻性的影響[D];長安大學;2015年
3 張新勇;基于EDEM方法的穩定土攪拌器攪拌過程模擬[D];長安大學;2015年
4 張曉亮;橡膠顆粒瀝青路面抑冰雪技術研究[D];長安大學;2014年
5 郭笑梅;瀝青攪拌站攪拌機構的優化研究[D];長沙理工大學;2012年
6 袁超;基于DSP的方圓坯電磁攪拌系統的研究與開發[D];湖南大學;2011年
7 蔡曉龍;對置式雙臥軸攪拌機攪拌參數的試驗研究[D];長安大學;2010年
8 趙守明;智能化高效優質混凝土攪拌機的參數優化研究[D];江蘇大學;2010年
9 王勇;基于表面能理論的瀝青與集料粘附性研究[D];湖南大學;2010年
10 曾志威;摻抗車轍劑瀝青混合料路用性能研究[D];長沙理工大學;2009年
,本文編號:2413177
本文鏈接:http://sikaile.net/kejilunwen/daoluqiaoliang/2413177.html