【摘要】：隨著國內港口、海岸和近海工程的逐漸減少,設計工作向海外拓展是未來的必然發展趨勢。但對于一些發展中國家,由于科技發展水平所限,設計工作所需的有關自然條件的數據十分缺乏。為了保證工程的安全和經濟,設計工作必須解決此類問題。本文結合本人參加的巴布亞-新幾內亞一個海岸工程設計為例,研究如何在實測資料匱乏的條件下,確定設計波浪,從而為工程的設計、施工打下良好的基礎。本文首先利用波浪后報數據,應用P-Ⅲ曲線分析方法給出工程區域深海設計波浪要素,再應用SWAN模型計算大范圍水域的波浪場,然后應用緩坡方程模型計算工程位置的設計波浪要素,從而為工程的平面布置及結構設計提供技術支持。
[Abstract]:With the decrease of domestic ports, coastal and offshore projects, it is an inevitable trend to expand the design work overseas in the future. However, for some developing countries, due to the limit of the level of scientific and technological development, the data on the natural conditions needed for the design work are very scarce. In order to ensure the safety and economy of the project, the design work must solve this kind of problem. Based on the example of a Papou-New Guinea coastal project, this paper studies how to determine the design wave under the condition of lack of measured data, so as to lay a good foundation for the design and construction of the project. In this paper, the wave elements of deep sea design in engineering area are given by using the method of P- 鈪，

本文編號：2333163