空心微珠泡沫材料的導熱性能研究
發布時間:2019-06-08 13:34
【摘要】:通過燒結空心微珠坯體的方法制備了超低容重空心微珠泡沫材料,研究了溫度、樣品的容重、開孔氣孔率對導熱性能的影響規律。結果表明,隨著溫度的升高,空心微珠泡沫材料的導熱系數逐漸增大;材料中的封閉孔部分變成連通孔之后,材料的導熱系數增大?招奈⒅榕菽牧先葜貫146kg/m~3時,導熱系數為0.054 W/(m·K),容重為100~600kg/m~3的樣品,樣品導熱系數與容重之間的關系曲線為y=0.00023 x+0.028
[Abstract]:Ultra-low bulk density hollow beads foam materials were prepared by sintering hollow beads. The effects of temperature, bulk density and porosity on thermal conductivity were studied. The results show that with the increase of temperature, the thermal conductivity of hollow bead foam increases gradually, and after the closed hole in the material becomes connected hole, the thermal conductivity of the material increases. When the bulk density of hollow bead foam is 146kg/m~3, the thermal conductivity is 0.054 W / (m 路K),). The relationship curve between thermal conductivity and bulk density is y 鈮,
本文編號:2495321
[Abstract]:Ultra-low bulk density hollow beads foam materials were prepared by sintering hollow beads. The effects of temperature, bulk density and porosity on thermal conductivity were studied. The results show that with the increase of temperature, the thermal conductivity of hollow bead foam increases gradually, and after the closed hole in the material becomes connected hole, the thermal conductivity of the material increases. When the bulk density of hollow bead foam is 146kg/m~3, the thermal conductivity is 0.054 W / (m 路K),). The relationship curve between thermal conductivity and bulk density is y 鈮,
本文編號:2495321
本文鏈接:http://sikaile.net/kejilunwen/cailiaohuaxuelunwen/2495321.html
最近更新
教材專著