本文選題：AlN + 表面氧化　； 參考：《人工晶體學報》2017年03期

【摘要】：對無壓燒結制備的AlN陶瓷氧化處理,采用傳統Mo-Mn法在預氧化后的AlN陶瓷表面制備金屬化層,并在Mo-Mn金屬化層表面實施鍍鎳制備Mo-Mn/Ni復合金屬化層。研究了AlN陶瓷氧化及金屬化對其導熱性能、力學性能、表面相組成及顯微結構的影響。結果表明:氮化鋁陶瓷經過1100℃保溫3 h的氧化處理之后,在其表面生成均勻分布的氧化鋁層,熱導率和抗彎強度分別提升了6.2%和26.6%。AlN陶瓷表層制備的Mo-Mn/Ni復合金屬化層厚度約為28μm,Al_2O_3層、Mo-Mn層與Ni層之間通過元素的相互遷移形成擴散層,層間緊密結合。金屬化后陶瓷的熱擴散系數較純AlN陶瓷基體提升3.8%。
[Abstract]:The AlN ceramics prepared by pressureless sintering were oxidized by traditional Mo-Mn method. The metallized layer was prepared on the surface of pre-oxidized AlN ceramics, and the Mo-Mn/Ni composite metallized layer was prepared by nickel plating on the Mo-Mn metallized surface. The effects of oxidation and metallization on the thermal conductivity, mechanical properties, surface phase composition and microstructure of AlN ceramics were studied. The results show that the aluminum nitride ceramic is oxidized at 1100 鈩，

本文編號：1831162