【摘要】：針對擺線齒錐齒輪刀盤參數的選取,研究了刀盤半徑修正對齒面接觸性能的影響。根據擺線齒錐齒輪加工刀具和產形輪的形成原理,建立了加工擺線齒錐齒輪的數學模型。對不同曲率的齒面做了嚙合分析。通過算例分析,研究了刀盤半徑修正對嚙合參考點處相對主曲率的影響。編寫了TCA程序,得到不同刀盤切向半徑修正量的齒面接觸印痕。通過三維軟件建立大、小輪齒面的三維模型并進行虛擬裝配,得到不同刀盤半徑修正的齒面在參考點處嚙合時的瞬時接觸橢圓。通過對比以及量化分析,得到接觸區長度隨著刀盤半徑修正量的增加而變短的規律。為擺線齒錐齒輪刀盤參數的設計計算提供了參考。
[Abstract]:Aiming at the selection of the parameters of cycloidal bevel gear cutters, the influence of cutter radius modification on tooth surface contact performance is studied. According to the forming principle of cycloidal bevel gear, the mathematical model of machining cycloidal bevel gear is established. Meshing analysis of tooth surfaces with different curvature is made. The influence of cutter radius modification on the relative principal curvature of meshing reference point is studied by an example. The TCA program is written to get the contact mark of the tooth surface of different cutter head tangential radius correction. The 3D model of the tooth surface of large and small wheel is built by 3D software and virtual assembly is carried out. The instantaneous contact ellipse of tooth surface modified by different cutter radius is obtained when meshing at reference point. By comparison and quantitative analysis, the length of contact area is shortened with the increase of cutter radius correction. It provides a reference for the design and calculation of the cutter head parameters of cycloidal bevel gear.
【作者單位】： 河南科技大學機械裝備先進制造河南省協同創新中心;
【基金】：國家自然科學基金(51475141)
【分類號】：TH132.41

【相似文獻】

相關期刊論文 前7條

1 ;雙刀盤切向切齒法[J];齒輪;1977年03期

2 胡家欽;;雙刀盤切向滾齒法與盤狀滾刀的切齒原理[J];湖北機械;1979年03期

3 吳良勇;;掘進機刀盤應力分析[J];水利電力施工機械;1982年04期

4 蔡文偉;;掘進機刀盤上的滾刀表置[J];水利電力施工機械;1984年03期

5 李成華;趙守疆;韓國政;;盤刀式切碎器刀盤系統動態特性的試驗[J];沈陽農業大學學報;1988年01期

6 黃慶斌;張平;洪啟祥;;青海雙護盾硬巖掘進盾構機刀盤的加工[J];金屬加工(冷加工);2011年09期

7 楊華勇;邢彤;龔國芳;;變轉速泵控模擬盾構刀盤驅動系統研究[J];浙江大學學報(工學版);2010年02期

相關會議論文 前1條

1 肖來元;楊家軍;;圓形刀盤機構的動態設計[A];第八屆全國結構工程學術會議論文集（第Ⅲ卷）[C];1999年

，

本文編號：2398310