【摘要】：氣動伺服系統以其具有可壓縮性、易實現高速等特點而適用于一種瞬時展開機構的伺服加載測試需求。通過分析氣動伺服系統中存在的強非線性及動態不確定性,提出非線性復合控制策略。針對不同的特征,設計不同的控制方法。通過反饋線性化進行變化,將輸出控制量分成兩個部分-線性部分和非線性部分,采用極點配置原理進行線性控制分量的設計,確保系統的穩定性,借助Maltab LMI工具箱求解線性矩陣不等式;針對系統存在動態不確定性時缺乏魯棒性,采用Lyapunov再設計方法進行非線性控制分量的設計,確保系統的魯棒性,采用ITAE優化算法進行求解,確保系統的跟蹤精度及快速性。通過理論分析,數字仿真及試驗對比驗證相結合的方法,展開氣動力矩伺服加載控制研究,所設計復合控制方法有效改善了非線性和動態不確定性對系統性能產生的不良影響,提高了系統的動態性能和控制品質。
[Abstract]:The pneumatic servo system is suitable for the servo loading test of an instantaneous development mechanism because of its compressibility and high speed. By analyzing the strong nonlinearity and dynamic uncertainty in pneumatic servo system, a nonlinear compound control strategy is proposed. According to different characteristics, different control methods are designed. Through feedback linearization, the output control is divided into two parts: linear part and nonlinear part. The linear control component is designed by pole assignment principle to ensure the stability of the system. The linear matrix inequalities (LMIs) are solved by Maltab LMI toolbox. In view of the lack of robustness in the system with dynamic uncertainty, the nonlinear control component is designed by using Lyapunov re-design method to ensure the robustness of the system, and the ITAE optimization algorithm is used to solve the problem to ensure the tracking accuracy and rapidity of the system. Through theoretical analysis, digital simulation and experimental comparison and verification, the research of pneumatic torque servo loading control is carried out. The designed compound control method can effectively improve the negative effects of nonlinear and dynamic uncertainty on the system performance. The dynamic performance and control quality of the system are improved.
【作者單位】： 湖北工業大學機械工程學院;北京航空航天大學自動化科學與電氣工程學院;
【分類號】：TH138

【參考文獻】

相關期刊論文 前2條

1 王祖溫,詹長書,楊慶俊,李軍,包鋼;氣壓伺服系統高性能魯棒控制器的設計[J];機械工程學報;2005年11期

2 周洪,路甬祥;電-氣比例/伺服控制系統的最優狀態反饋控制研究[J];航空學報;1990年10期

【共引文獻】

相關期刊論文 前6條

1 魏瓊;焦宗夏;吳帥;王君;湯亮;;氣動伺服加載系統的非線性復合控制[J];機械工程學報;2017年14期

2 徐慧鑫;趙文宏;陳晨;周芬芬;程城遠;;雙面拋光機上研磨盤振動抑制的半主動控制方法[J];機電工程;2012年11期

3 趙文宏;周海軍;宋闖;程城遠;徐樂俊;袁巨龍;;晶片拋光機壓力加載系統分析[J];機電工程;2012年02期

4 劉棟;梅雪松;馮斌;張東升;;基于Symlets小波濾波的滾珠絲杠伺服進給系統頻響特性辨識[J];機械工程學報;2011年13期

5 ，

本文編號：2326061