【摘要】：根據計算流體動力學(CFD)基本原理,使用FLUENT軟件,以某型號燃?xì)馀跒檠芯繉?duì)象,對引射器關鍵參數如噴嘴距、混合段直徑、混合段長度等進行數值模擬,得出引射器各參數對引射系數的影響。依據模擬結果對該燃?xì)馀诘囊淦鹘Y(jié)構尺寸進行優化,并應用于對應的燃?xì)馀�。�?duì)優化后的燃?xì)馀谶M(jìn)行測試,并與改進前的燃?xì)馀谶M(jìn)行對比,其爆炸分貝數升高了10%,并縮短了燃?xì)馀谶B續爆炸時所需的最短時間間隔。該研究方法對于提升燃?xì)馀谛阅苡兄^為重大的參考價值。
[Abstract]:According to the basic principle of computational fluid dynamics (CFD), the key parameters of injector, such as nozzle distance, mixing section diameter and mixing section length, are numerically simulated by using FLUENT software. The influence of ejector parameters on ejection coefficient is obtained. Based on the simulation results, the injector structure of the gas gun is optimized and applied to the corresponding gas gun. The optimized gas gun was tested and compared with the improved one. The number of decibels increased by 10 and the shortest time interval needed for continuous explosion of the gas gun was shortened. The research method has important reference value for improving the performance of gas gun.
【作者單位】： 武漢科技大學機械自動化學院;
【分類號】：TH69

【相似文獻】

相關期刊論文 前1條

1 王志寶;李德文;王樹德;郭勝均;;環縫式引射器變工況特性的試驗研究[J];煤礦機械;2012年03期

，

本文編號：2243853