【摘要】：根據用戶需求設計的新型臥式液壓機,其機架由兩根橫梁和三根拉桿組成,三根拉桿的位置分布不對稱于液壓力的作用中心。針對由拉桿的位置分布不對稱性造成的拉桿受力不均衡等問題,建立了非對稱臥式液壓機機架優化模型,提出了一種慣性權重凹函數遞減的粒子群算法,利用Matlab和ANSYS程序,結合某工程實例進行優化實驗,實驗表明所提出的算法比慣性權重線性遞減的粒子群算法更有效,優化后機架的重量減輕了13%,拉桿之間的受力更加均衡,達到了對非對稱液壓機機架優化設計的目的。
[Abstract]:A new type of horizontal hydraulic press is designed according to the requirements of customers. The frame is composed of two beams and three pulling rods, and the position distribution of the three rods is asymmetrical to the action center of the hydraulic pressure. In order to solve the problem that the tension bar is not balanced due to the asymmetry of the position distribution of the rod, the optimization model of the frame of the asymmetrical horizontal hydraulic press is established, and a particle swarm optimization algorithm with decreasing inertia weight concave function is proposed. The program Matlab and ANSYS are used to solve the problem. The experimental results show that the proposed algorithm is more effective than the particle swarm optimization algorithm with decreasing inertial weight linearly. The weight of the frame is reduced by 13%, and the force between the rods is more balanced. The purpose of optimization design of asymmetric hydraulic press frame is achieved.
【作者單位】： 重慶大學機械傳動國家重點實驗室;
【基金】：國家科技支撐計劃資助項目(2014BAF02B02) 教育部創新團隊發展計劃項目(IRT_15R64)
【分類號】：TH137;TP18
，

本文編號：2144075