本文選題：智能閥門定位器 + 模糊Smith��； 參考：《實驗室研究與探索》2017年05期

【摘要】：針對工業調節閥中廣泛存在的時滯現象,提出一種基于模糊原理的帶有Smith預估器的智能閥門定位器控制方法。分析智能閥門定位器的結構和原理,通過設計Smith預估器補償滯后時間,實現超前響應,克服時滯對系統性能的影響;通過模糊控制與PID控制結合,設計調整模糊規則,實現控制器參數的自整定。兩者結合構成模糊Smith方法,提高了系統的動靜態性能。模糊內�？刂破鲗朔䲡r滯、提高系統性能有良好的效果,將模糊Smith器與模糊內�？刂破骷癙ID控制器進行仿真研究對比。仿真結果表明,模糊Smith控制方法比模糊內�？刂品椒ê蛡鹘y(tǒng)PID方法更能有效地提高調節閥的快速性,克服時滯,改善系統性能。
[Abstract]:An intelligent valve positioner control method with Smith predictor based on fuzzy principle is proposed in this paper. This paper analyzes the structure and principle of intelligent valve positioner, designs Smith predictor to compensate lag time, realizes advance response, overcomes the influence of time delay on system performance, designs and adjusts fuzzy rules by combining fuzzy control with PID control. The self-tuning of controller parameters is realized. The fuzzy Smith method is combined to improve the dynamic and dynamic performance of the system. The fuzzy internal model controller has a good effect on overcoming the delay and improving the system performance. The fuzzy Smith controller is compared with the fuzzy internal model controller and the PID controller. The simulation results show that the fuzzy Smith control method is more effective than the fuzzy internal model control method and the traditional PID method in improving the speed of the control valve, overcoming the delay and improving the system performance.
【作者單位】： 華東理工大學化工過程先進控制和優化技術教育部重點實驗室;上海交通大學電工與電子技術中心;中國石油化工股份有限公司鎮海煉化分公司;
【基金】：國家自然科學基金面上項目(21376077);國家自然科學基金優秀青年基金項目(61422303) 上海市自然科學基金項目(14ZR1410000,14ZR1421800) 流程工業綜合自動化國家重點實驗室開放課題基金資助項目(PAL-N201404)
【分類號】：TH134;TP273
，

本文編號：1948167