本文選題：鋼絲繩橡膠輸送帶 + Maxwell模型��； 參考：《機械設計與研究》2017年03期

【摘要】：鋼絲繩橡膠輸送帶是由鋼絲繩芯和橡膠覆蓋層組成的復合材料,其動力學參數的確定是研究帶式輸送機動態特性的關鍵問題,首先提出由鋼絲繩廣義Maxwell模型和橡膠基體三元件固體模型并聯組合得鋼絲繩芯橡膠輸送帶的混合本構模型,采用粘彈性理論建立動應變作用下混合本構模型方程,推導應力解析解,再采用反演變換法建立本構動力學參數的辨識模型,然后對不同位移、頻率加載條件下鋼絲繩、橡膠基體進行了動態加載實驗與本構模型參數識別,并采用多項式對參數進行了擬合,揭示了不同加載條件下動力學參數的變化規律,最后通過實驗對動力學參數擬合公式的準確性進行了驗證。
[Abstract]:The rubber conveyor belt of steel wire rope is a composite material composed of wire rope core and rubber covering layer. The determination of its dynamic parameters is the key problem to study the dynamic characteristics of belt conveyor. In this paper, a hybrid constitutive model of rubber conveyor belt with steel wire rope, which is composed of generalized Maxwell model of wire rope and solid model of three elements of rubber matrix in parallel, is first proposed. The mixed constitutive model equation under dynamic strain is established by viscoelastic theory. The analytical solution of stress is derived, and then the identification model of constitutive dynamic parameters is established by inverse transformation method. Then the dynamic loading experiments and the identification of constitutive model parameters of wire rope and rubber matrix under different displacement and frequency loading conditions are carried out. The polynomial is used to fit the parameters, and the variation of dynamic parameters under different loading conditions is revealed. Finally, the accuracy of the fitting formula of dynamic parameters is verified by experiments.
【作者單位】： 遼寧工程技術大學機械工程學院;遼寧工程技術大學國家地方聯合礦山液壓技術與裝備工程研究中心;煤炭工業協會高端綜采成套裝備動力學測試與大數據分析中心;
【基金】：國家自然基金資助項目(51404132)
【分類號】：TH222

【相似文獻】

相關期刊論文 前6條

1 肖友新;;用膠粘劑粘接和修補橡膠輸送帶[J];井礦鹽技術;1987年04期

2 胡彪;趙新;王樹桐;張曉雨;;廢纖維芯橡膠輸送帶再制造關鍵設備研究[J];起重運輸機械;2014年01期

3 陳玉玖;;橡膠輸送帶粘接工藝的應用[J];機械;1988年02期

4 王明全;橡膠輸送帶冷粘接頭工藝[J];起重運輸機械;1988年11期

5 楊超;;橡膠輸送帶的修補技術和材料[J];化工管理;2014年23期

6 ;[J];;年期

，

本文編號：1890535