本文選題：蜂窩結構 + 增材制造��； 參考：《計算機集成制造系統》2017年10期

【摘要】：為解決增材制造中的蜂窩結構設計建模問題,提出一種模仿自然界蜂巢構建過程的蜂窩結構生成設計方法。通過對蜜蜂構筑六邊形巢穴的內在機理進行研究,將蜂窩結構生成建模分為蜂窩結構平面主線生成和蜂窩壁板構建兩個過程。分析了自然界蜂窩結構"由曲轉直"的變化原理,根據其演化進程中存在的相切關系,提出了基于切線構造法的均勻蜂窩平面主線生成方法,并利用改進后的修補算法實現了非均勻蜂窩平面主線的生成設計;模仿蜜蜂蜂蠟堆積形成蜂窩壁的方式,提出了等壁厚蜂窩結構構建方法。最后結合通用軟件驗證了仿自然式的蜂窩結構生成設計方法的可行性。
[Abstract]:In order to solve the problem of honeycomb structure design modeling in material augmentation manufacturing, a design method of honeycomb structure generation is proposed, which mimics the process of honeycomb construction in nature. By studying the internal mechanism of honeybee building hexagonal nests, the honeycomb structure generation modeling is divided into two processes: honeycomb structure plane main line generation and honeycomb panel construction process. In this paper, the changing principle of "straight from curving" of honeycomb structure in nature is analyzed. According to the tangent relation existing in the evolution of honeycomb structure, a method of generating homogenous honeycomb plane master line based on tangent construction method is proposed. An improved patch algorithm is used to design the main line of non-uniform honeycomb plane, and a method of constructing honeycomb structure with equal thickness is proposed, which mimics the way of honeybee wax accumulation to form honeycomb wall. Finally, the feasibility of the natural-like honeycomb structure design method is verified by general software.
【作者單位】： 北京航空航天大學機械工程與自動化學院;北京機電工程研究所;
【基金】：國家科技支撐計劃資助項目(2015BAF18B01)~~
【分類號】：TH122;TH16
，

本文編號：1853916