本文選題：表面品質相似度 + 聚類分析��； 參考：《潤滑與密封》2017年05期

【摘要】：采用大止推圈摩擦副,針對兩個物體在相互摩擦過程中,材料配合的相互耦合摩擦現象進行實驗研究。選取模糊聚類分析法建立計算模型,研究對摩兩表面品質相似度與摩擦因數的關系。實驗結果表明:兩對摩表面品質的相似度與摩擦因數之間明顯相關;在干摩擦試驗各參數相同條件下,隨著對摩表面品質相似度的增大其摩擦因數也增大。計算得到的表面相似度與摩擦因數Pearson相關性大于0.8,證明所提出的表面品質相似度計算模型的正確性。
[Abstract]:A large thrust ring friction pair is used to study the coupling friction phenomenon of two materials in the process of friction. The fuzzy cluster analysis method was selected to establish the calculation model, and the relationship between the similarity of surface quality and friction coefficient was studied. The experimental results show that the similarity between the surface quality of two pairs of friction is obviously related to the friction coefficient, and the friction coefficient increases with the increase of the similarity of the friction surface quality under the same conditions of dry friction test. The correlation between the surface similarity and the friction coefficient Pearson is greater than 0.8, which proves the correctness of the proposed surface quality similarity calculation model.
【作者單位】： 延邊大學工學院;
【基金】：國家自然科學基金項目(51265050)
【分類號】：TH117.1

【相似文獻】

相關期刊論文 前1條

1 楊淑霞;賈全倉;李俊文;;機械加工的表面品質探討[J];裝備制造技術;2012年04期

相關碩士學位論文 前1條

1 李昌杰;對摩材料表面品質相似度與摩擦系數關系[D];延邊大學;2016年

，

本文編號：1848004