發布時間：2018-05-02 11:58

  本文選題：動態測控 + 搖枕彈簧��； 參考：《儀表技術與傳感器》2017年08期

【摘要】：為了對搖枕彈簧按高度尺寸細化分類,提出了可分類的自動化動態測控一體化系統的方案,包含了機械系統、控制系統、測量系統及數據處理系統。其中,為保證分揀控制的準確性,設計了一套面向可分類動態測控搖枕彈簧的數據處理系統,硬件上以上位機與PCI控制板卡為主體;軟件上設計了最大值讀取模塊、數據傳輸模塊、檔位分類模塊以及數據分檔入庫模塊。同時,針對動態測量系統可靠性進行了實測,測量及數據處理系統滿足使用要求。
[Abstract]:In order to classify the pillow spring according to height, a scheme of automatic dynamic measurement and control system is proposed, which includes mechanical system, control system, measurement system and data processing system. In order to ensure the accuracy of sorting control, a data processing system for classifiable dynamic measurement and control pillow spring is designed. The hardware is composed of upper computer and PCI control board, and the maximum reading module is designed in the software. Data transmission module, gear classification module and data file storage module. At the same time, the reliability of the dynamic measurement system is measured, and the measurement and data processing system meets the requirements.
【作者單位】： 吉林大學通信工程學院;大陸汽車電子(長春)有限公司;中國聯通吉林省分公司;
【分類號】：TH135
，

本文編號：1833787