本文選題：幾何特征 + 混合推理　； 參考：《組合機床與自動化加工技術》2017年11期

【摘要】：機械加工過程中影響能耗的因素很多,工件結構設計階段和加工工藝階段的參數等都會影響能耗。為了利用工件結構設計階段參數實現能耗預測,通過控制工件的幾何特征來控制最終的加工能耗,將工件拆分為單個幾何特征,在分析工件幾何特征與加工能耗關系的基礎上,提出了一種基于幾何特征的工件加工能耗預測方法。建立了基于幾何特征的工件加工能耗模型;構建了幾何特征屬性信息的特征表;提出了通過歷史能耗數據預測加工能耗的方法:以實例推理為主、規則推理為輔的混合推理技術進行幾何特征加工能耗的匹配檢索,并采用指數平滑法修正歷史能耗。最后以某主軸的加工能耗預測為例驗證了該方法的有效性。
[Abstract]:There are many factors that affect the energy consumption in the process of machining, and the parameters of the structural design stage and the process stage of the workpiece will affect the energy consumption. In order to realize energy consumption prediction by using the parameters of workpiece structure design stage, the final processing energy consumption is controlled by controlling the geometric feature of workpiece, and the workpiece is divided into single geometric feature. Based on the analysis of the relationship between the geometric feature of workpiece and the energy consumption of machining. A method for predicting the energy consumption of workpiece machining based on geometric features is proposed. In this paper, a workpiece processing energy consumption model based on geometric features is established, a feature table of geometric feature attribute information is constructed, and a method to predict processing energy consumption through historical energy consumption data is proposed: case-based reasoning is the main method. The hybrid reasoning technique supplemented by rule reasoning is used to match and retrieve the energy consumption of geometric feature processing, and the exponential smoothing method is used to correct the historical energy consumption. Finally, the effectiveness of the method is verified by the prediction of processing energy consumption of a spindle.
【作者單位】： 武漢科技大學機械自動化學院;
【基金】：國家高技術研究發展計劃(863)計劃典型機床綠色生產工藝技術評估及應用支持系統研究(2014AA041504)
【分類號】：TH16

【相似文獻】

相關期刊論文 前10條

1 陳新娟;;基于排隊論的工件加工優化模型研究[J];攀枝花學院學報;2010年03期

2 徐金華;;淺析加工后工件變形的原因及預防措施[J];機械研究與應用;2011年05期

3 Stefan Hakuba;;大批量和中等批量工件的高效加工[J];現代制造;2008年28期

4 謝朝泉;;現場離心泵的能耗計算[J];煉油設備設計;1981年03期

5 張秀艷;張秀梅;;薄環工件加工過程易產生變形問題的探討[J];硅谷;2008年23期

6 閻艷;王國新;胡立臣;寧汝新;;制造執行中訂單投放順序與工件加工批量集成決策[J];北京理工大學學報;2008年09期

7 馬光;白文超;王文濤;謝杰;耿佳偉;;不規則工件的新型加工方法[J];現代機械;2011年04期

8 賀曉輝;鄢萍;劉飛;胡韶華;陳國榮;;基于支持向量機和功率信息的工件在線識別方法[J];中國機械工程;2011年07期

9 聞寶聯,涂光備,錢新,梁伯勛;連續供料離心機強旋流場中能耗的研究[J];流體機械;2003年11期

10 余鳳燕;;工件加工工序的自由度分析[J];企業科技與發展;2008年10期

，

本文編號：1833089