本文選題：面齒輪 + 正交實驗��； 參考：《機械傳動》2017年09期

【摘要】：對面齒輪磨削齒面粗糙度進行正交實驗分析,采用多元非線性回歸分析法建立了砂輪轉速、進給速度、磨削深度的回歸模型,分析了砂輪轉速、進給速度、磨削深度等磨削參數對面齒輪磨削齒面粗糙度的影響狀況,最后通過數學模型對單因素實驗組數據進行實測值與預測值的比較,顯示6組數據預測值與實際測量值的最大誤差為11.13%。說明相對誤差不大,此模型具有一定的精度。
[Abstract]:The tooth surface roughness of the face gear grinding is analyzed by orthogonal experiment, and the regression model of grinding wheel speed, feed speed and grinding depth is established by multiple nonlinear regression analysis. The influence of grinding parameters such as grinding wheel speed, feed speed, grinding depth and other grinding parameters on the surface roughness of face gear grinding is analyzed. The comparison between the measured data and the predicted value of the experimental group shows that the maximum error between the predicted values of the 6 sets of data and the actual measured values is 11.13%., which shows that the relative error is not significant, and this model has a certain precision.

【作者單位】： 湖南工業大學機械工程學院;
【基金】：國家自然科學基金(51375161) 湖南省自然科學基金(2015JJ5018)
【分類號】：TG580.6;TH132.41

【相似文獻】

相關期刊論文 前10條

1 М.П.НОВИКОВ ,程┌，

本文編號：1787807