考慮定子外殼漏磁的同極式永磁偏置徑向磁軸承磁路模型
本文選題:磁軸承 切入點:解析模型 出處:《電工技術學報》2017年11期
【摘要】:同極式永磁偏置徑向磁軸承的永磁偏置磁場在定子外殼內形成較大漏磁,而且外殼的有效面積相對工作氣隙較大,即使在鐵心與外殼間加入隔磁層的情況下,漏磁仍不可忽略,必須進行準確計算。首先直接求解拉普拉斯方程獲得隔磁層內的磁場分布,并結合保角變換計算漏磁區域的端部效應,然后求解工作氣隙的永磁偏置磁場和電勵磁控制磁場,最后建立完整磁路模型和電磁力解析模型。三維有限元仿真結果表明,所建立的磁路模型能準確計算磁軸承工作范圍的電磁參數。依據飛輪儲能系統的總體需求,設計了徑向磁軸承系統,實驗結果驗證了所建立解析模型和有限元模型的準確性。
[Abstract]:The permanent magnet bias magnetic field of the same pole permanent magnet offset radial magnetic bearing forms a large magnetic leakage in the stator housing, and the effective area of the shell is relatively large relative to the working air gap, even if the magnetic barrier layer is added between the core and the housing, the magnetic leakage can not be ignored.Accurate calculations must be made.The magnetic field distribution in the magnetic layer is obtained by solving the Laplace equation directly, and the end effect of the magnetic leakage region is calculated by combining the conformal transformation, and then the permanent magnet bias magnetic field and the electrically controlled magnetic field of the air gap are solved.Finally, a complete magnetic circuit model and an analytical model of electromagnetic force are established.The three dimensional finite element simulation results show that the established magnetic circuit model can accurately calculate the electromagnetic parameters of the working range of the magnetic bearing.According to the overall requirement of flywheel energy storage system, the radial magnetic bearing system is designed. The experimental results verify the accuracy of the analytical model and the finite element model.
【作者單位】: 海軍工程大學艦船綜合電力技術國防科技重點實驗室;
【基金】:國家自然科學基金項目(51137005,51407192) 國家自然科學重點基礎研究發展計劃(973計劃)項目(2013CB035601)資助
【分類號】:TH133.3
【相似文獻】
相關期刊論文 前10條
1 沈鉞,劉鋼;四自由度磁軸承─轉子系統的數學模型[J];礦山機械;2000年08期
2 楊志軼,趙韓,王勇,何世娣;飛輪電池磁軸承系統結構及控制[J];合肥工業大學學報(自然科學版);2002年06期
3 孫首群,劉鋼,耿海鵬,戚社苗,虞烈;徑向主動磁軸承承載因子分析[J];機械設計;2002年03期
4 龍志強,羅昆;電磁型磁軸承的動態模型建立與分析[J];磁性材料及器件;2003年02期
5 趙雪山,李冰,鄧智泉,王成華;永磁偏置徑向軸向磁軸承的H_∞控制研究[J];機電設備;2003年05期
6 龍志強,郝阿明;永磁式磁軸承的被動懸浮和主動懸浮問題研究[J];機床與液壓;2003年06期
7 韓邦成,李也凡,賈宏光,吳一輝;利用有限元法計算徑向磁軸承性能[J];摩擦學學報;2004年02期
8 謝志意;一種新型徑向混合磁軸承[J];機械工程師;2005年05期
9 頓月芹,徐衍亮,孔宇;轉子磁體永磁偏置混合磁軸承的三維有限元分析[J];山東大學學報(工學版);2005年01期
10 韓邦成,吳一輝;有限元法計算偏心對徑向磁軸承參數的影響[J];哈爾濱工業大學學報;2005年02期
相關會議論文 前10條
1 朱q,
本文編號:1728913
本文鏈接:http://sikaile.net/jixiegongchenglunwen/1728913.html