本文選題：均勻設計試驗　切入點：錐閥芯優化　出處：《機械科學與技術》2017年10期 　論文類型：期刊論文

【摘要】：針對溢流閥在線檢測系統中,錐閥芯材料為紫銅時,閥芯力學性能不滿足設計要求的問題,提出通過優化部分機械結構參數,進而提升閥芯力學性能的研究方法。設計了一種基于均勻設計試驗法的閥芯力學性能的仿真試驗方案,借助于有限元法、均勻設計試驗、動態響應模型等研究方法,分析了各參數對結構優化影響的敏感度,求解了多指標函數與結構參數之間的動態響應模型。最后,利用指標圖譜和遺傳算法對結構參數進行了優化計算,對比了均勻設計試驗法和指標圖譜法的優化結果。結果表明,均勻設計試驗和指標圖譜優化結果十分接近,均勻設計試驗法適用于閥芯力學性能的優化設計。
[Abstract]:Aiming at the problem that the mechanical properties of the valve core do not meet the design requirements when the cone valve core material is copper in the on-line inspection system of relief valve, the optimization of some mechanical structure parameters is put forward. A simulation test scheme based on uniform design test method is designed to improve the mechanical properties of the spool. By means of finite element method, uniform design test, dynamic response model, etc. The sensitivity of each parameter to structural optimization is analyzed, and the dynamic response model between multi-index function and structural parameter is solved. Finally, the structural parameters are optimized by using index map and genetic algorithm. The optimization results of uniform design test method and index map method are compared. The results show that the uniform design test method is very close to the index map optimization result, and the uniform design test method is suitable for the optimization design of the mechanical properties of the valve core.
【作者單位】： 火箭軍工程大學201教研室;
【分類號】：TH137.521

【相似文獻】

相關期刊論文 前1條

1 盛永莉;均勻設計試驗法及其應用[J];濟南大學學報(綜合版);1995年04期

，

本文編號：1591404