剛體碰撞的Hertz接觸力模型比較分析
發布時間:2018-01-13 15:12
本文關鍵詞:剛體碰撞的Hertz接觸力模型比較分析 出處:《機械設計與制造》2017年08期 論文類型:期刊論文
更多相關文章: 接觸力模型 Hertz接觸理論 能量損失 多剛體碰撞
【摘要】:對以Hertz接觸理論為基礎的四種接觸力模型進行了比較分析,并通過兩球一次對心碰撞過程數值模擬結果來進一步說明不同接觸力模型的特性,仿真結果表明:與純彈性接觸力模型相比,Hunt-Crossley(H-C)接觸力模型、Lankarani-Nikravesh(L-N)接觸力模型以及Flores接觸力模型由于考慮了碰撞過程中的能量損失,因此更加符合實際碰撞情形。此外后三種接觸力模型中,H-C接觸力模型和L-N接觸力模型更適合用來處理大恢復系數的碰撞問題。在分析間隙機構的動力學特性時,可以為接觸力模型的合理選擇提供依據。
[Abstract]:Four kinds of contact force models based on Hertz contact theory are compared and analyzed, and the characteristics of different contact force models are further illustrated by the numerical simulation results of the one-centricity collision process of two balls. The simulation results show that the Hunt-Crossley H-C) contact force model is compared with the pure elastic contact force model. The Lankarani-Nikraveshwe L-N) contact force model and the Flores contact force model take into account the energy loss in the collision process. Therefore, it is more consistent with the actual collision case. In addition, in the latter three contact force models. The H-C contact force model and the L-N contact force model are more suitable for dealing with the collision problem with large recovery coefficient. The analysis of the dynamic characteristics of the clearance mechanism can provide a basis for the reasonable selection of the contact force model.
【作者單位】: 鄭州大學機械工程學院;
【基金】:國家自然科學基金(U1304510)
【分類號】:TH112
【正文快照】: 1引言用不同的接觸力模型在含間隙機構的動力學分析方面做了大量工作,但很少有人對這些接觸力模型進行系統完整的比較和分在對含間隙運動副機構進行動力學分析時必須選擇合適的析,以至于人們對這些模型的應用范圍和選用原則缺乏更深入全接觸碰撞力模型,該模型除了要同時考慮碰
【相似文獻】
相關期刊論文 前6條
1 吳飛科;羅繼偉;張磊;王東峰;;關于Hertz點接觸理論適用范圍的探討[J];軸承;2007年05期
2 劉勝超;王東峰;喻煒;;基于Matlab的Hertz接觸參數和主曲率差函數關系的擬合[J];軸承;2011年10期
3 王濤;傅行軍;;基于Hertz接觸模型的碰摩轉子動力學響應研究[J];汽輪機技術;2009年01期
4 高霽;蘇新偉;鐘佳麗;;Hertz理論在球軸承應用方面的局限性[J];軸承;2008年11期
5 任偉;陳家慶;高巖;;多重網格積分法在非Hertz接觸問題中的應用[J];軸承;2008年05期
6 康文龍;李琳琳;;基于牛頓-拉普森及Hertz理論的軸承性能分析[J];制造技術與機床;2011年12期
,本文編號:1419392
本文鏈接:http://sikaile.net/jixiegongchenglunwen/1419392.html
最近更新
教材專著