本文關鍵詞：三自由度混沌振動篩的設計與研究　出處：《安徽理工大學》2017年碩士論文　論文類型：學位論文

  更多相關文章： 并聯機構 振動篩 混沌振動 運動仿真 優化設計

【摘要】：篩分機械在生產生活的各個領域都有著廣泛的運用,傳統篩分機械的已經不能滿足人們?nèi)找嬖鲩L(zhǎng)的需求。傳統篩分機械篩分效率較低,篩分時篩孔易于被堵塞等缺點在現代社會工業生產加工中已經愈發明顯�；煦缋碚撌巧鲜兰o(jì)中頁被提出的一種新學說,在前人的努力下已經證實混沌振動在物料篩分上相對于傳統機械有著更大的優勢,更好的篩分效率,更大的物料處理量,與更強的透篩率。結合并聯機構剛度、精度較高的特點、可以構建復雜運動曲線等特點,本文提出了綜合并聯機構與混沌振動理論的一種新型三自由度混沌振動篩。通過ADAMS運動學虛擬樣機仿真軟件對其運動特性進行仿真,再利用ADAMS、MATLAB、ANSYS軟件對其動力學特性以及具體結構進行分析,基于TRIZ理論對其振動篩結構進行優化。具體工作如下所述:第一步:對三自由度混沌振動篩按要求進行具體設計,創建三維模型,數學與動力學模型,利用拓?fù)錂C(jī)構學知識對振動篩進行機型分析,得到其DOF(自由度)為三平移,在對其建立運動學模型并且進行分析。第二步:為使計算機模擬仿真時的計算量減小,對三自由度混沌振動篩的三維模型進行簡化,其后通過ADAMS對簡化模型進行仿真,得到各方向受激勵輸出的響應數據。第三步:利用MATLAB與ADAMS的后處理模塊對仿真得出的數據進行混沌識別,確定振動系統在工作時已經進入混沌狀態。第四步:基于TRIZ理論對初始設計的三自由度混沌振動篩振幅調整困難進行了優化,增強振動篩的適用性。第五步:使用ANSYS有限元分析軟件對三自由度混沌振動篩篩架進行六階模態分析,確定共振頻率區,確保振動篩在工作時避開共振區,有效的提高設備壽命與安全性。
[Abstract]:Screening machinery has been widely used in all fields of production and life. The traditional screening machinery can not meet the increasing needs of people. The traditional screening machine is less efficient. In modern society, the defects of sieve holes being easily blocked have become more and more obvious in modern society. Chaos theory is a new theory which was put forward in 0th century. It has been proved that chaotic vibration has more advantages than traditional machinery in material screening, better screening efficiency, larger material handling capacity, stronger screening rate and stiffness of parallel mechanism. The characteristics of high precision can be used to construct complex motion curves. In this paper, a new three-degree-of-freedom chaotic vibrating screen is proposed, which integrates the parallel mechanism and chaotic vibration theory. Its motion characteristics are simulated by ADAMS kinematics virtual prototype simulation software. The dynamic characteristics and specific structure of the system are analyzed by using Adams MATLAB ANSYS software. Based on the TRIZ theory, the structure of the vibrating screen is optimized. The specific work is as follows: the first step: the three-degree-of-freedom chaotic vibrating screen according to the requirements of specific design, create three-dimensional model, mathematics and dynamics model. The DOF (degree of freedom) of the vibrating screen was analyzed by using the topological mechanism knowledge, and the DOF was obtained as three translation. The kinematics model is established and analyzed. The second step is to simplify the 3D model of the three-degree-of-freedom chaotic vibrating screen in order to reduce the computational complexity of computer simulation. Then the simplified model is simulated by ADAMS. The third step is to use the post-processing module of MATLAB and ADAMS to recognize the simulation data. 4th steps: based on the TRIZ theory, the amplitude adjustment of the three-degree-of-freedom chaotic vibrating screen is optimized. Enhance the applicability of vibrating screen. 5th steps: use ANSYS finite element analysis software to carry on the sixth order modal analysis to the three-degree-of-freedom chaotic vibrating screen frame to determine the resonance frequency region. Ensure that the vibrating screen avoids the resonance area in operation, effectively improve the equipment life and safety.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TH237.6

【參考文獻】

相關期刊論文 前10條

1 王英;李瑞琴;宋勝濤;;平面三自由度連桿機構的型綜合[J];機械傳動;2014年07期

2 牛雪梅;高國琴;劉辛軍;鮑智達;;三自由度驅動冗余并聯機構動力學建模與試驗[J];農業工程學報;2013年16期

3 沈惠平;尹洪波;王振;黃濤;李菊;鄧嘉鳴;楊廷力;;基于拓?fù)浣Y(jié)構分析的求解6-SPS并聯機構位置正解的研究[J];機械工程學報;2013年21期

4 王庚祥;劉宏昭;原大寧;;空間4-SPS/CU并聯機構的受力分析[J];農業工程學報;2012年22期

5 羅文豹;李維嘉;汪瀟;高巖;吳金波;;一種三自由度運動平臺機構的優化設計[J];中國機械工程;2011年14期

6 王正浩,張德琦;混沌振動篩的數值模擬[J];選煤技術;2005年01期

7 趙弘,張登山;混沌振動研究[J];鋼鐵研究;2003年05期

8 王正浩,王寧,高巖;混沌振動篩的研究[J];礦山機械;2003年01期

9 郭迎福,張永忠,陳安華,鄧志鵬,毛樹楷;干法選煤主機松邊鏈垂度及排煤端底板形狀確定[J];礦山機械;2002年04期

10 周廣林,陳心昭,陳劍;混沌振動在振動篩降噪中應用的探討[J];礦山機械;2002年01期

，

本文編號：1374121