本文選題：長三角　切入點：經濟增長　出處：《寧波大學》2013年碩士論文　論文類型：學位論文

【摘要】：本文將長三角地區全要素生產率(Total Factors Productivity，TFP)作為研究對象，，以區域和產業兩個層面為切入點，首先系統闡述了全要素生產率理論，然后對長三角兩省一市和全國水平的TFP分進行了測算和比較分析，并以此來探求長三角地區經濟增長的源泉和提出相關的問題，最后為長三角經濟長遠發展提出有針對性的對策建議。在區域?qū)用娴姆治鲋�，采用以索洛模型為基礎的增長核算方法對長三角兩省一市1993～2011年的面板數據進行了全要素生產率及其增長率的估算；在產業層面的分析中，采用數據包絡分析的Malmquist指數法(DEA-Malmquist)測算了長三角兩省一市制造業和服務業的全要素生產率，并分別對其進行了分解。主要研究結論如下： 1、從區域經濟增長的角度看，長三角地區整體的全要素生產率和兩省一市的全要素生產率均高于全國平均水平；但長三角全要素生產率增長率與全國平均水平相當，技術進步對經濟增長的貢獻不明顯，其中只有上海的平均增長率較高，明顯超過全國平均水平，而蘇浙則表現一般。 2、在中國經濟逐步轉型發展的過程中，長三角經濟發展取得了很大成就，但是長三角地區，特別是江蘇省和浙江省，同樣面臨著經濟增長方式從基礎要素積累到生產率推動型的迫切要求。 3、長三角地區制造業全要素生產率增長較為明顯，在經濟總量中處于舉足輕重的地位。將制造業全要素生產率從技術進步和技術效率兩個角度進行分解之后，我們對長三角制造業進行考察分析，結果發現，長三角地區制造業的全要素生產率主要是靠技術進步來推動，而技術效率的貢獻表現為負增長。 4、長三角地區整體上和兩省一市的服務業對經濟增長的貢獻均較小，服務業資源利用效率不高，雖然技術進步指數平均水平在增長，但是技術效率較低。
[Abstract]:In this paper, Total Factors Productivity TFP (TFP) in the Yangtze River Delta region is taken as the research object, and the theory of TFP is expounded systematically at the two levels of region and industry. Then, the paper calculates and compares the TFP scores of the two provinces, one city and the whole country in the Yangtze River Delta, and probes into the sources of economic growth in the Yangtze River Delta region and puts forward some related problems. Finally, the paper puts forward some countermeasures and suggestions for the long-term economic development of the Yangtze River Delta. Using the growth accounting method based on Solow model, this paper estimates the total factor productivity and its growth rate in the panel data of two provinces and one city in the Yangtze River Delta from 1993 to 2011. DEA-Malmquist, a Malmquist index method based on data envelopment analysis, is used to measure the total factor productivity of manufacturing and service industries in two provinces and one city in the Yangtze River Delta, and it is decomposed respectively. The main conclusions are as follows:. 1. From the point of view of regional economic growth, the total factor productivity of the Yangtze River Delta region as a whole and the total factor productivity of two provinces and one city are both higher than the national average, but the growth rate of the total factor productivity of the Yangtze River Delta is similar to the national average. The contribution of technological progress to economic growth is not obvious, only Shanghai has a higher average growth rate than the national average, while Jiangsu and Zhejiang have a general performance. 2. In the course of the gradual economic transformation and development of China, the economic development of the Yangtze River Delta has made great achievements, but the Yangtze River Delta region, especially Jiangsu Province and Zhejiang Province, Also faces the economic growth pattern from the basic factor accumulation to the productivity promotion type urgent request. 3. The total factor productivity of manufacturing industry in the Yangtze River Delta region is increasing obviously, which plays an important role in the total economic volume. After the total factor productivity of manufacturing industry is decomposed from the two angles of technological progress and technical efficiency, The results show that the total factor productivity of manufacturing industry in the Yangtze River Delta region is mainly driven by technological progress, and the contribution of technological efficiency is negative growth. 4. The contribution of service industry to economic growth in the Yangtze River Delta region as a whole and in two provinces and one city is relatively small, and the utilization efficiency of service resources is not high. Although the average level of technological progress index is increasing, the technical efficiency is relatively low.
【學位授予單位】：寧波大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：F127

【參考文獻】

相關期刊論文 前4條

1 張小蒂;李曉鐘;;對我國長三角地區全要素生產率的估算及分析[J];管理世界;2005年11期

2 鄭玉歆;;全要素生產率的再認識——用TFP分析經濟增長質量存在的若干局限[J];數量經濟技術經濟研究;2007年09期

3 張學良;;服務經濟發展與長三角城市群經濟一體化[J];中國浦東干部學院學報;2011年02期

4 楊永府;;商業銀行全要素生產率增長的市場因素[J];學術探索;2013年09期

本文編號：1572717