本文選題：結構設計標準化 + X設計院��； 參考：《云南大學》2014年碩士論文

【摘要】：標準化在制造業中已經得到了廣泛而成功的運用,其研究和應用一直備受人們關注,但對于民用建筑設計行業這樣以個案為工作對象的傳統的知識密集型行業而言,照搬制造業的標準化生產方式無法成功。民用建筑的標準化設計在我國主要以國家層面進行,通過頒布國標,部標,地方標準實施標準化設計,對于設計企業的標準化設計還研究的不多。 本論文從標準化及結構設計有關概念入手,以x設計院為例介紹了民用建筑企業的特點和行業現狀,分析了x設計院結構設計標準化實施的現狀和效果,找出了當前結構設計標準化實施過程中在執行力,設計前準備,評審定案,各專業間配合,設計校審幾個方面存在問題和不足,并針對性的提出了改進方法,對改進后的成果從設計院內部,審查機構,甲方,施工方及監理方的角度提出了的檢驗方法；從設立保證體系,監管部門,人員培訓,內部管理信息系統銜接,內部獎懲措施幾個方面提出了保障措施。本論文是對設計企業采用結構設計標準化的探索,為全專業標準化設計應用提供理念和方法借鑒,對x設計院的發展有著一定的應用價值,對其他設計企業具有一定參考價值和借鑒意義。
[Abstract]:Standardization has been widely and successfully used in the manufacturing industry, and its research and application have been paid close attention to. However, for the traditional knowledge-intensive industry such as the civil architectural design industry, which takes individual cases as the object of work, The standardized production mode of copying the manufacturing industry cannot succeed. The standardized design of civil buildings is mainly carried out at the national level in our country. Through the promulgation of national standards, ministry standards and local standards, the standardization design of design enterprises is not much studied. This paper starts with the concepts of standardization and structure design, taking x design institute as an example, introduces the characteristics of civil construction enterprises and the present situation of the industry, and analyzes the present situation and effect of the implementation of the standardization of structure design in x design institute. This paper finds out the problems and shortcomings existing in the implementation of the current structural design standardization, such as executive power, preparation before design, evaluation and decision, cooperation among various specialties, design calibration and review, and puts forward some improvement methods. From the point of view of the design institute, the examination organization, the Party A, the construction party and the supervisor, the improved results are put forward from the aspects of establishing the guarantee system, the supervision department, the personnel training, and the internal management information system. Internal reward and punishment measures put forward several aspects of protection measures. This paper is an exploration to the design enterprise to adopt the structure design standardization, provides the idea and the method reference for the whole specialty standardization design application, has certain application value to the development of the x design institute It has certain reference value and significance to other design enterprises.
【學位授予單位】：云南大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TU318;F426.92;F203

【參考文獻】

相關期刊論文 前10條

1 曹飛;劉偉慶;陸偉東;;我國地下軌道交通工程建設標準化分析[J];交通標準化;2009年Z1期

2 金云清;淺談建筑設計行業人力資源開發如何適應入世問題[J];建筑設計管理;2002年01期

3 謝斯坦;淺淡加入WTO后建筑設計行業如何應對市場競爭[J];建筑設計管理;2002年06期

4 井建申;中外建筑設計體制比較研究[J];建筑經濟;2003年04期

5 范誠,王群;建筑師市場策略發展趨勢的展望——考察當代中國實驗建筑師的活動[J];建筑學報;2005年11期

6 田野;看當今著名國際建筑事務所[J];建筑知識;2002年02期

7 李光熙;;路在腳下:效益分配與薪酬改革——云南省設計院八年改革之三[J];建筑設計管理;2010年12期

8 龍玉峰;丁宏;焦楊;;建筑工業化的標準化設計研究[J];混凝土世界;2012年04期

9 李光熙;;路在腳下:機構重組與資源整合——云南省設計院八年改革巡回之一[J];建筑設計管理;2010年09期

10 祖似杰,莊衛民;標準化是企業項目管理的支點[J];企業標準化;2005年04期

，

本文編號：2096903