張之洞與近代工業博物館鋼結構節點有限元分析
發布時間：2018-10-25 06:43
【摘要】：利用ANSYS有限元軟件對張之洞與近代工業博物館部分復雜節點進行了有限元分析。分析結果表明,梁柱連接節點處應合理設置加勁肋,從而保證節點處的承載能力;桁架結構中,腹桿和弦桿宜盡量等寬,弦桿內加勁肋可采用兩面或三面焊接。通過對復雜節點進行有限元分析,可以更加直觀地了解節點處應力應變分布情況,從而更加合理的進行節點設計。
[Abstract]:The finite element analysis of some complex joints between Zhang Zhidong and the Museum of Modern Industry is carried out by using ANSYS finite element software. The analysis results show that the stiffening rib should be set reasonably at the joint of Liang Zhu connection, so as to ensure the bearing capacity of the joint, and in the truss structure, the web and chord should be as wide as possible, and the stiffening rib in the chord can be welded on two or three sides. Through finite element analysis of complex joints, the distribution of stress and strain in the joints can be more intuitively understood, and the design of joints is more reasonable.
【作者單位】： 中南建筑設計院股份有限公司;
【分類號】：TU391
，
本文編號：2292935
[Abstract]:The finite element analysis of some complex joints between Zhang Zhidong and the Museum of Modern Industry is carried out by using ANSYS finite element software. The analysis results show that the stiffening rib should be set reasonably at the joint of Liang Zhu connection, so as to ensure the bearing capacity of the joint, and in the truss structure, the web and chord should be as wide as possible, and the stiffening rib in the chord can be welded on two or three sides. Through finite element analysis of complex joints, the distribution of stress and strain in the joints can be more intuitively understood, and the design of joints is more reasonable.
【作者單位】： 中南建筑設計院股份有限公司;
【分類號】：TU391
，
本文編號：2292935
本文鏈接：http://sikaile.net/jingjilunwen/jianzhujingjilunwen/2292935.html
最近更新
教材專著
