【摘要】：實驗研究平行于墻體的熱薄型PMMA板的滴落行為,并進行理論分析。使用紅外熱成像儀記錄滴落現象,使用電子秤記錄樣板質量。結果表明,隨著材料與墻體的間距增大,滴落時間、滴落質量和滴落前后燃盡增長距離的數值均是先減小后增大,正面和背面的火焰高度差值逐漸減小,直至背面火焰高度超過正面,距離超過25 mm時間距的影響可以忽略。假設滴落行為與材料的表面凈熱通量、拉伸黏度以及熔化的PMMA所受到的重力有關。
[Abstract]:The dropping behavior of hot thin PMMA plate parallel to the wall is studied experimentally and analyzed theoretically. Infrared thermal imager is used to record drop phenomenon and electronic scale is used to record sample quality. The results show that with the increase of the distance between the material and the wall, the drop time, drop mass and the increase distance of burnout before and after dropping decrease first and then increase, and the difference of flame height between front and back decreases gradually. The influence of the distance over 25 mm is negligible until the flame height on the back is over the front. It is assumed that the drop behavior is related to the surface net heat flux, tensile viscosity and gravity of molten PMMA.
【作者單位】： 中國礦業大學安全工程學院;
【基金】：江蘇省自然科學基金項目(BK20131117)
【分類號】：TU564;TU998.1
，

本文編號：2226394