【摘要】：根據核電機組對常規島冷卻塔冷卻能力的要求,某內陸核電廠采用常規冷卻塔所需要的冷卻面積達22 000 m~2。一機一塔若采用常規冷卻塔,面臨冷卻介質難以穿越塔下雨區到達塔內中部區域的技術瓶頸;一機兩塔又面臨造價和用地等方面的壓力。針對上述問題,提出采用改變填料支撐方式的懸吊式布置、改變冷卻塔配風方式的高位收水冷卻塔和改進換熱方式的雙背壓凝汽器以及它們之間的組合等解決方案,并采用年最小費用法對上述方案進行技術經濟比較,得出不同組合方式下的最優方案,分別給出單背壓和雙背壓機組的冷卻塔配置方案。提供了一個經濟合理的循環供水系統供業主方選擇采用,這對其他核電廠大型冷卻塔的設計和優化具有較大的參考價值。
[Abstract]:According to the requirement of cooling capacity of conventional island cooling tower for nuclear power unit, the cooling area required for the adoption of conventional cooling tower in a inland nuclear power plant is 22000 mm2. If a conventional cooling tower is used for one machine and one tower, it is difficult for the cooling medium to pass through the rain area of the tower to reach the central part of the tower, and the two towers face the pressure of cost and land use. In view of the above problems, the solutions are put forward, such as the suspended arrangement of changing the packing support mode, the high water intake cooling tower with changing the air distribution mode of the cooling tower and the double back pressure condenser with improved heat transfer mode, and the combination between them, and so on. By using the annual minimum cost method, the technical and economic comparison of the above schemes is carried out, and the optimal schemes under different combination modes are obtained, and the cooling tower configuration schemes of single back pressure and double back pressure units are given respectively. An economical and reasonable circulating water supply system is provided for the owners to choose and adopt, which is of great reference value for the design and optimization of large cooling towers in other nuclear power plants.
【作者單位】： 深圳中廣核工程設計有限公司;
【分類號】：TU991.42

【相似文獻】

相關期刊論文 前5條

1 崔虹;;淺析核電常規島與火電土建施工質量檢驗的差異[J];武漢大學學報(工學版);2011年S1期

2 郁靜紅;嶺澳二期核電站常規島主廠房結構型式探討[J];電力勘測設計;2004年01期

3 武春霖;金欣;;核電廠常規島主廠房設備安裝保證措施研究[J];山西電力;2014年01期

4 黃丹;侯磊;蔡健;;三代核電EPR 1750MW機組常規島汽機房變階柱偏壓性能試驗[J];電力建設;2011年09期

5 ;[J];;年期

相關會議論文 前1條

1 李向東;王愛東;鄭培鋼;龍國慶;;核電廠常規島的消防策略研究[A];中國土木工程學會工程防火技術分會成立大會暨學術交流會論文集[C];2012年

相關碩士學位論文 前3條

1 石小川;常規島調試標準化流程體系的構建與應用[D];華北電力大學;2014年

2 林煥彬;核電常規島的風荷載數值模擬研究[D];華南理工大學;2011年

3 林立孚;核電站常規島主廠房典型節點研究[D];華南理工大學;2012年

，

本文編號：2119401