發布時間：2018-06-13 10:59

  本文選題：藍牙 + Arduino��； 參考：《東北大學》2015年碩士論文

【摘要】：智能家居控制系統是高效的住宅設施與家庭日常事務的管理系統。本文以智能家居控制為課題進行研究,旨在加強人機交互,實現對家居的友好控制。本文的主要研究內容包括:設計了智能家居控制系統整體架構,將系統分為三層,上層為通信層,中間是中繼控制層,第三層是家居系統,其中藍牙紅外中繼器通過基于Arduino開發板的紅外設備搭載藍牙無線模塊來實現;分析紅外控制理論、藍牙模塊技術和Arduino相關技術;根據系統整體架構設計,將系統功能分為硬件系統和軟件操作管理兩個子系統對紅外信號、中繼器信息等數據表進行了設計和實現;以三星遙控器為例,基于Arduino開發,結合藍牙無線通訊技術設計了藍牙紅外線中繼器,包括發射、接收兩部分,并進行了編碼、解碼實現;對藍牙模塊選擇分析,實現了藍牙傳輸電路和串行通訊;詳細實現了軟件操作和管理部分。最后根據系統的設計搭建了系統硬件環境和軟件環境,進行具體的系統測試;測試結果表明本系統能滿足系統需求,達到預定目標。
[Abstract]:Intelligent home control system is an efficient management system for residential facilities and household daily affairs. The purpose of this paper is to strengthen the human-computer interaction and realize the friendly control of home. The main research contents of this paper are as follows: the whole architecture of intelligent home control system is designed, the system is divided into three layers, the communication layer is the upper layer, the relay control layer is in the middle, and the home system is the third layer. Among them, Bluetooth infrared repeater is implemented by carrying Bluetooth wireless module on infrared device based on Arduino development board; infrared control theory, Bluetooth module technology and Arduino related technology are analyzed; according to the overall architecture of the system, The functions of the system are divided into two subsystems: hardware system and software operation management subsystem. The infrared signal, repeater information and other data tables are designed and implemented. Taking the Samsung remote control as an example, the system is developed based on Arduino. Combined with Bluetooth wireless communication technology, the Bluetooth infrared repeater is designed, including transmitting and receiving, encoding and decoding, Bluetooth module selection is analyzed, Bluetooth transmission circuit and serial communication are realized. The software operation and management are implemented in detail. Finally, the hardware environment and software environment are built according to the design of the system, and the test results show that the system can meet the requirements of the system and achieve the predetermined goal.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU855;TP273

【參考文獻】

相關期刊論文 前3條

1 呂莉;羅杰;;智能家居及其發展趨勢[J];計算機與現代化;2007年11期

2 魏平俊;方向前;韓建勛;;一種智能家居安防系統的電路設計[J];半導體技術;2006年08期

3 秦勃;於雷;邵峰晶;王琳;;無線智能家居監控系統[J];計算機應用研究;2006年04期

，

本文編號：2013801