本文選題：塔機 + 安全監控　； 參考：《西安電子科技大學》2015年碩士論文

【摘要】：近年來,我國房地產行業迅猛發展,塔機作為建筑行業必備的重型機械設備,得到了廣泛應用。但由于塔機自身結構和工作環境的原因,由塔機引發的安全事故頻有發生,因此,應該引起建筑行業和監管部門足夠重視。為此,我們設計了一種基于ARM處理器的塔機安全監控系統,實現監控塔機自身參數引發的安全事故、塔機與地面建筑物之間及塔機與塔機之間的碰撞事故。論文主要設計塔機安全監控系統的硬件平臺。根據塔機安全監控系統的設計要求給出了硬件設計方案,詳細設計了主控系統、存儲器、LCD顯示、串行接口、基礎傳感器、繼電器等模塊,獲取了本塔機吊重、吊鉤高度、小車位移、塔臂角度、塔身傾斜角、塔機控制箱溫度、當?shù)仫L(fēng)速、塔機地理位置等參數,并通過電臺模塊實時獲取其它塔機的運行參數,在此基礎上,由塔機安全監控系統軟件產生繼電器控制信號,實現本塔機的安全監控。最后,實際測試結果表明,論文設計的塔機安全監控系統硬件平臺工作穩定,達到了設計要求,并通過了使用單位的驗收。
[Abstract]:In recent years, with the rapid development of real estate industry in China, tower crane, as a necessary heavy machinery equipment in construction industry, has been widely used. However, due to the structure and working environment of the tower crane, the safety accidents caused by the tower crane occur frequently, so it should be paid enough attention to by the construction industry and the supervision department. Therefore, we design a kind of tower crane security monitoring system based on arm processor, which can monitor the safety accident caused by the tower crane's own parameters, the collision accident between tower crane and ground building and between tower crane and tower crane. This paper mainly designs the hardware platform of tower crane security monitoring system. According to the design requirements of tower crane security monitoring system, the hardware design scheme is given, and the main control system, memory LCD display, serial interface, basic sensor, relay module and other modules are designed in detail. The parameters such as car displacement, tower arm angle, tower tilt angle, tower crane control box temperature, local wind speed, tower crane geographical position and so on are obtained in real time by radio module. On this basis, the operation parameters of other tower cranes are obtained in real time. The relay control signal is generated by the tower crane security monitoring system software to realize the safety monitoring of the tower crane. Finally, the actual test results show that the hardware platform of the tower crane security monitoring system designed in this paper works stably, meets the design requirements, and has passed the acceptance of the user.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU61;TP277

【參考文獻】

相關期刊論文 前10條

1 趙星;;STM32基于FSMC的SRAM擴展技術[J];工業控制計算機;2015年06期

2 邸興;張杰;;基于FPGA的DVI視頻信號發生器設計[J];現代電子技術;2015年02期

3 陳晨;郭健忠;郝軍;;大學生寢室電腦防盜系統[J];中小企業管理與科技(下旬刊);2013年10期

4 吳學松;;2010中國塔式起重機行業發展研討會 論道塔機安全與可持續發展[J];建筑機械化;2011年01期

5 鄭文靜;李明強;舒繼武;;Flash存儲技術[J];計算機研究與發展;2010年04期

6 周永平;魏志剛;雷磊;李文飛;;基于標準測試接口的某型導彈電子箱測試儀[J];微計算機信息;2008年11期

7 吳學松;;中國塔式起重機大步走向國際市場[J];建筑機械化;2007年10期

8 楊國棟;古獻義;;塔式起重機在國外的發展簡介[J];建筑機械化;2007年10期

9 張慶法;;基于IrDA的串口通信設計[J];微計算機信息;2006年33期

10 江俊輝;基于ARM的嵌入式系統硬件設計[J];微計算機信息;2005年10期

，

本文編號：2011293