本文選題：硬化砂漿 + 水泥含量��； 參考：《中國測試》2016年11期

【摘要】：為探索處理硬化砂漿試樣的方法,使水泥含量測定結果更接近真實值,首先成型不同粉煤灰摻量的砂漿試樣,在砂漿試樣標準養護到一定齡期后,基于硬化膠凝材料中結合水的損失過程,利用Ca O測定法研究不同的試樣處理方法對硬化砂漿中水泥含量測定結果的影響,得到處理硬化砂漿試樣的方法:即無水乙醇終止水化后,60℃鼓風烘干,然后以10℃/min的速度由室溫升到(520±10)℃,保持1 h,并且通過實驗證明結合水含量是影響硬化砂漿中水泥含量測定結果的關鍵因素之一。采用該方法處理后,不同齡期相同膠凝材料含量和同一齡期不同粉煤灰摻量硬化砂漿中水泥含量測定結果的相對誤差都在±5%以內。
[Abstract]:In order to explore the method of treating hardened mortar samples and make the determination results of cement content closer to the true value, the mortar samples with different fly ash content were first formed, and the mortar samples were cured to a certain age after the mortar samples were cured to a certain age. Based on the loss process of binding water in hardened cementing materials, the effect of different sample treatment methods on the determination of cement content in hardened mortar was studied by means of Cao method. The method of treating hardened mortar samples is as follows: after the hydration of anhydrous ethanol is terminated, the air is blow-dried at 60 鈩，

本文編號：1931925