本文選題：銅渣 + 高溫��； 參考：《硅酸鹽通報》2016年10期

【摘要】：利用工業固體廢棄物銅渣制備無機膠凝材料,并對其膠砂試件的高溫力學性能進行了實驗研究。分別制備了普通硅酸鹽水泥-銅渣復合膠凝體系(CSC-x)和堿激發銅渣膠凝體系(CSA-x),測試了常溫及100℃、200℃、400℃、600℃、800℃、1000℃、1200℃高溫作用后的質量損失、殘余抗折強度和殘余抗壓強度。結果表明:200℃后,CSA-x體系的質量損失率低于CSC-x體系;CSA-x體系表現出較好的耐高溫性能,1200℃高溫作用后CSA-x體系的殘余抗壓強度為常溫時的3~4倍。
[Abstract]:Inorganic cementitious materials were prepared from industrial solid waste copper slag, and the mechanical properties of cement sand at high temperature were studied experimentally. The common Portland cement-copper slag composite cementitious system (CSC-x) and alkali-activated copper slag cementitious system (CSA-xX) were prepared, respectively. The mass loss at room temperature and 100 鈩，

本文編號：1892826