本文選題：冶金礦山工程 + 模塊化建造�。� 參考：《西安建筑科技大學》2015年碩士論文

【摘要】：工業化和信息化已經成為當下工程建設的熱門課題,冶金礦山工程模塊化建造是以其為指導思想,探索的新型建造模式。模塊化建造憑借經濟效益高、施工周期短的優勢越來越受到冶金礦山企業重視,目前冶金礦山工程模塊化建造技術稀缺和力學仿真方法不成熟是阻礙其推廣的最大原因。針對以上現狀,本論文將結合冶金工程的獨特性,依托代表性工程開展了如下研究工作:(1)分析SINO鐵礦項目的模塊化建造方法,對模塊化分、模塊化建造過程、施工過程監測和仿真模型修正進行研究,總結可供其他冶金礦山工程參考的模塊化建造流程。(2)剖析施工力學基本理論,結合模塊化建造施工力學不定性和循環性特點,提出采用劃分施工分析步,按照靜力組合的概率極限分析的方法力學仿真模塊化施工。改進現有分析方法,提出適用于冶金礦山工程模塊化建造施工過程力學仿真的修正的分步建模法和修正的生死單元法,最后以流程圖形式說明具體使用方法。(3)運用Abaqus和Midas/Gen有限元分析軟件,對SINO主體設備的模塊化建造進行了力學仿真分析。針對施工過程的特殊因素,采用放大化分析法得出了其限值,與施工過程監測相結合,保證了建造過程的安全。介紹了SINO實際建造過程和采取的構造措施,對冶金礦山工程主體設備模塊化建造提出了技術性建議。(4)采用修正的分步建模法對E-House的模塊化建造進行力學仿真分析,優化了原始的結構設計方案,總結了結合施工過程力學仿真的模塊結構設計方法,對冶金礦山工程功能模塊的模塊化建造提出技術性建議。(5)總結本文研究成果,分析當前研究的局限性,為未來的研究指明方向。本文依托SINO鐵礦項目,對冶金礦山工程模塊化建造技術和力學仿真進行研究,取得了良好的效果,保證了工程的順利實施,為冶金礦山工程的模塊化建造提供了理論和技術依據。
[Abstract]:Industrialization and information technology have become a hot topic in current engineering construction, and the modular construction of metallurgical mine engineering is a new construction mode based on its guiding ideology. With the advantages of high economic benefit and short construction period, modular construction has been paid more and more attention by metallurgical mining enterprises. At present, the scarcity of modular construction technology and the immaturity of mechanical simulation methods in metallurgical mine engineering are the biggest reasons that hinder its popularization. In view of the above situation, this paper will combine the uniqueness of metallurgical engineering and carry out the following research work as follows: 1) analyze the modular construction method of SINO iron ore project, divide the modularization into two parts, modularize construction process, The construction process monitoring and simulation model modification are studied, and the modular construction process for other metallurgical mine engineering is summarized. The basic theory of construction mechanics is analyzed, combined with the characteristics of uncertainty and circulation of modular construction mechanics. According to the method of probability limit analysis of static combination, the modular construction of mechanical simulation is proposed. By improving the existing analytical methods, a modified step-by-step modeling method and a modified birth and death element method are proposed for the mechanical simulation of modular construction process in metallurgical mine engineering. Finally, the concrete use method is explained by flow chart. (3) using Abaqus and Midas/Gen finite element analysis software, the modularization construction of SINO main equipment is analyzed by mechanical simulation. Aiming at the special factors in the construction process, the limit value is obtained by using the amplification analysis method, which is combined with the construction process monitoring to ensure the safety of the construction process. This paper introduces the actual construction process and construction measures of SINO, and puts forward technical suggestions for modularization construction of main equipment of metallurgical mine engineering. The modified step-by-step modeling method is used to simulate and analyze the modularization construction of E-House. This paper optimizes the original structural design scheme, summarizes the modular structure design method combined with the mechanical simulation of the construction process, and puts forward some technical suggestions for the modular construction of the functional modules in metallurgical mine engineering. The limitation of current research is analyzed and the direction of future research is pointed out. Based on the SINO iron mine project, this paper studies the modular construction technology and mechanical simulation of metallurgical mine engineering, and obtains good results, which ensures the smooth implementation of the project. It provides theoretical and technical basis for modular construction of metallurgical mine engineering.
【學位授予單位】：西安建筑科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU745.7;TD85

【參考文獻】

相關期刊論文 前8條

1 郭彥林;劉學武;劉祿宇;張慶林;;CCTV新臺址主樓鋼結構施工變形預調值計算的分階段綜合迭代法[J];工業建筑;2007年09期

2 郭彥林,繆友武,婁俊杰,林冰,徐衍林,崔巍;澳門綜合體育館主桁架整體提升及提升塔架分析[J];建筑結構學報;2005年01期

3 郝成新;整體頂升法在300t網架結構屋蓋改造工程中的應用[J];建筑科學;1999年01期

4 羅堯治,邱鵬,沈雁彬,孫旭光,張冰;滑移法施工在張弦網殼結構工程中的應用[J];施工技術;2005年10期

5 李志鵬;汪仲琦;馬洪春;;常州市體育場游泳館鋼結構屋蓋吊裝施工[J];施工技術;2009年03期

6 封杰;羅國峰;衛志強;胡瀟俊;黃寅路;楊興富;李冠群;;上海世博會演藝中心懸臂桁架吊裝技術[J];施工技術;2009年08期

7 朱鈺鋒;郝際平;沈登龍;鄭江;田黎敏;王宇;李寧;魏尚起;;SINO大型磨機運輸施工力學模擬研究[J];施工技術;2015年12期

8 余慶軍;潘思明;常亞楠;;淺談工程建設模塊化施工[J];中國高新技術企業;2010年18期

相關博士學位論文 前2條

1 潘多忠;大跨度鋼結構施工力學分析及應用研究[D];華南理工大學;2011年

2 鄭江;復雜剛性鋼結構施工過程力學模擬及計算方法研究[D];西安建筑科技大學;2011年

相關碩士學位論文 前3條

1 孫九勝;非滑道區大型鋼結構模塊建造大型資源研究[D];天津大學;2012年

2 邱鵬;空間網格結構滑移法施工全過程分析方法及若干關鍵問題的研究[D];浙江大學;2006年

3 朱紫貴;結構監測技術在海上重大件運輸中的應用研究[D];大連海事大學;2013年

，

本文編號：1891552