本文選題：曲桿單元 + 切線剛度矩陣��； 參考：《建筑科學與工程學報》2016年06期

【摘要】：基于曲桿單元應力-弦長關系和矩陣微分理論,推導出曲桿單元在彈性與彈塑性狀態下的切線剛度矩陣精確公式。研究構件取理想彈塑性材料,結構支座取固定鉸支座和可動鉸支座2種約束情況,考慮構件具有初彎曲,采用曲桿單元切線剛度矩陣和廣義位移控制法,取結構自重為參考荷載,對節點鉸接的K8大跨單層網殼結構進行彈塑性后屈曲分析。結果表明:曲桿單元切線剛度矩陣公式精確性很高,可有效用于大型鉸接單層網殼彈塑性后屈曲分析。
[Abstract]:Based on the stress-chord length relation of curved bar element and the matrix differential theory, the exact formula of tangent stiffness matrix of curved bar element under elastic and elastic-plastic state is derived. In this paper, ideal elastic-plastic material is used for structural support and fixed hinge support and movable hinge support are used for structural support. Considering the initial bending of the member, tangent stiffness matrix of curved bar element and generalized displacement control method are adopted. Taking the deadweight of the structure as the reference load, the elastic-plastic post-buckling analysis of the single-layer latticed shell structure with long span K8 joints is carried out. The results show that the tangent stiffness matrix formula of curved bar element is highly accurate and can be effectively applied to the elastoplastic post-buckling analysis of large hinged single-layer latticed shells.
【作者單位】： 廣州大學土木工程學院;
【基金】：廣州市科技計劃項目(201604020071)
【分類號】：TU399
，

本文編號：1881108