預臭氧——常規工藝處理含鐵原水的中試研究
本文選題:除鐵 + 臭氧; 參考:《中國給水排水》2016年17期
【摘要】:以模擬鐵超標的水源水作為研究對象,在水廠常規工藝的基礎上增加預臭氧工藝,考察了該組合工藝對含鐵原水的處理效果。結果表明,常規工藝對鐵的去除效果有限;臭氧—沉淀工藝可以有效去除原水中總鐵,原水中總鐵含量為7.5~8.0 mg/L時,臭氧投加量提高至5 mg/L即可保證出水鐵含量達標,但對濁度去除效果差。結合經濟性原則,當原水總鐵含量為5~8 mg/L時,最佳工藝參數如下:O_3投加量為4 mg/L,PAC投加量為20 mg/L;當原水中總鐵含量為8~10mg/L時,最佳工藝參數如下:O_3投加量為5 mg/L,PAC投加量為20 mg/L。
[Abstract]:Taking the source water with simulated iron exceeding the standard as the research object, the pre-ozone process was added to the conventional process of the water plant, and the effect of the combined process on the treatment of the raw water containing iron was investigated. The results showed that the removal effect of iron was limited by conventional process, and the total iron content in raw water could be effectively removed by ozonic-precipitation process. When the total iron content in raw water was 7.5o 8.0 mg/L, the amount of ozone added could be increased to 5 mg/L to ensure that the iron content of effluent could reach the standard. But the turbidity removal effect is poor. In combination with the economic principle, when the total iron content of raw water is 5 ~ 8 mg/L, the optimum technological parameters are as follows: O _ (3) = 4 mg 路L ~ (-1) PAC = 20 mg / L, and when the total iron content in raw water is 8~10mg/L, the optimum technological parameters are as follows: the ratio of O _ 3 to O _ 3 is 5 mg / L, the dosage of LPAC is 20 mg 路L ~ (-1).
【作者單位】: 同濟大學污染控制與資源化研究國家重點實驗室;蕪湖華衍水務有限公司;
【基金】:國家自然科學基金資助項目(51178321) 國家水體污染控制與治理科技重大專項(2012ZX07403-001、2012ZX07403-002、2008ZX07421-002) 住房和城鄉建設部研究開發項目(2009-K7-4) 高校博士點基金資助項目(20120072110050)
【分類號】:TU991.2
【相似文獻】
相關期刊論文 前10條
1 樂毅;;提高企業常規工藝水平的幾點淺見[J];機械制造;1987年09期
2 ;要重視常規工藝的發展提高[J];航空工藝技術;1979年11期
3 漆文光;陸少鳴;常穎;;強化常規工藝對苯酚污染的應急處理技術研究[J];供水技術;2008年06期
4 肖友道;;藻類對常規工藝水廠的影響研究[J];廣東化工;2011年01期
5 呂麗行,黃露霞;國內給水廠常規工藝改造的必要性和措施[J];工業安全與環保;2004年08期
6 韓宏大;周玉文;何文杰;;強化常規工藝處理黃河原水的試驗研究[J];中國給水排水;2006年05期
7 劉文飛,張玉先;水處理常規工藝對原水水質變化的適應性[J];凈水技術;2005年05期
8 張姝佳;王秀花;;給水處理常規工藝除污染特性初探[J];科技傳播;2011年14期
9 韓曉剛;黃廷林;;水廠常規工藝去除有機物和總磷[J];環境工程學報;2013年05期
10 石明巖,張軍,崔福義,張海龍;給水處理常規工藝除污染特性初探[J];凈水技術;2003年01期
相關會議論文 前3條
1 張晶亮;苑明娥;王偉;王坤;;凈水廠深化常規工藝除藻的研究與實踐[A];2011全國給水排水技術信息網年會暨技術交流會論文集[C];2011年
2 江家登;高乃云;;藻類對常規工藝的影響及強化混凝技術高效處理高藻水[A];2009水業高級技術論壇論文集[C];2009年
3 林清麗;張克峰;賈瑞寶;;浮濾池處理引黃水庫水的試驗研究[A];2006年山東省制冷空調學術年會“格力杯”優秀論文集[C];2006年
相關重要報紙文章 前1條
1 邵筱琳;常規工藝強化讓老水廠煥發新活力[N];中國建設報;2013年
相關博士學位論文 前2條
1 皇甫小留;納米MnO_2凝聚動力學及其在強化常規工藝去除痕量鉈的研究[D];哈爾濱工業大學;2015年
2 梁爽;超濾組合工藝除藻效能及影響因素研究[D];北京工業大學;2012年
相關碩士學位論文 前3條
1 劉曉旭;基于飲用水ICR數據庫的有機物去除分析及模型建立研究[D];清華大學;2015年
2 陳秀珍;西安市曲江水廠原水水質特征及常規工藝運行效果分析[D];西安建筑科技大學;2010年
3 郭偉鋒;常規工藝處理天津灤河原水的優化試驗研究[D];西安建筑科技大學;2008年
,本文編號:1873480
本文鏈接:http://sikaile.net/jingjilunwen/jianzhujingjilunwen/1873480.html