本文關鍵詞：一種基于擠出固化的建筑3D打印裝置設計及驗證　出處：《華中科技大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 建筑3D打印 關鍵技術 裝置設計 擠出固化 實驗驗證

【摘要】：目前,建筑行業的自動化水平與其他行業相比尚顯落后,隨著世界特別是發達國家對工程建造建設概念的轉變,實現快速、高效的自動化建造已成為世界建筑行業的發展趨勢。建筑3D打印技術是近年來產生的一項高新自動化建筑技術,具有廣闊的發展?jié)摿?對其進行系統的研究是非常必要的。首先,本文對建筑3D打印技術的基本原理、特點進行了梳理,在此基礎上把目前已有的建筑3D打印技術劃分為擠出固化和選擇性粘結兩種工藝,并對其進行了比較分析。通過具體深入的分析,本文將建筑3D打印的關鍵技術問題歸納為材料、工藝及裝置、標準。另外,將建筑3D打印技術與裝配式建筑技術、模塊化建筑技術等先進建筑技術進行對比評價,通過系統科學的綜合評價表明建筑3D打印技術是一項可行的、前沿的、有巨大潛力的新型建筑技術,但技術不夠成熟,仍然有一些關鍵技術問題亟待解決。其次,針對擠出固化這種打印工藝,本文設計了一種基于擠出固化的建筑3D打印裝置,包括控制系統、XYZ運動系統、擠出系統、數據處理系統。然后,對裝置的控制系統、XYZ運動系統、擠出系統進行了詳細的設計及設備選型,對裝置的數據處理系統設計了用于數據模型數據處理的關鍵算法并進行了軟件開發。最后,通過基于擠出固化的建筑3D打印實驗驗證了本文中設計的基于擠出固化建筑3D打印裝置的正確性,并對實驗裝置、實驗材料以及實驗驗證的全部過程進行了系統的分析。本文理清了建筑3D打印關鍵技術問題,并設計了一種基于擠出固化的建筑3D打印裝置,對于人們研究建筑3D打印技術,研發建筑3D打印裝置具有重要的借鑒意義。
[Abstract]:At present, the automation level of the construction industry is still lagging behind compared with other industries. With the transformation of the concept of engineering construction in the world, especially in developed countries, the realization of rapid. Efficient automatic construction has become the development trend of the construction industry in the world. Building 3D printing technology is a high and new automatic building technology which has broad development potential in recent years. It is very necessary to study it systematically. First of all, the basic principle and characteristics of 3D printing technology of architecture are combed in this paper. On this basis, the existing building 3D printing technology is divided into two processes: extrusion curing and selective bonding, and it is compared and analyzed. In this paper, the key technical problems of building 3D printing are summarized as materials, techniques and devices, standards. In addition, building 3D printing technology and assembly building technology are also discussed. The comparative evaluation of advanced building technology, such as modular building technology, shows that the 3D printing technology is a new type of building technology with great potential, which is feasible, cutting-edge and has great potential through the comprehensive evaluation of system science. But the technology is not mature, there are still some key technical problems to be solved. Secondly, aiming at the printing process of extrusion curing, this paper designs a building 3D printing device based on extrusion curing, including control system. XYZ motion system, extrusion system, data processing system. Then, the control system of the device XYZ motion system, extrusion system is designed in detail and equipment selection. The key algorithm for data processing of data model is designed and the software is developed. The correctness of the 3D printing device based on extrusion curing is verified by the experiment of building 3D printing based on extrusion curing. The experimental materials and the whole process of experimental verification are systematically analyzed. In this paper, the key technical problems of building 3D printing are clarified, and a building 3D printing device based on extrusion curing is designed. For people to study the building 3D printing technology, research and development of building 3D printing device has important reference significance.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU741

【相似文獻】

相關期刊論文 前6條

1 王建勤;;推薦一種新型的罐蓋打印裝置—自鎖式字模框架[J];輕工機械;1991年04期

2 А.С.Ажогин;左寶信;;橡皮絕緣導線標簽打印裝置[J];電工技術;1985年06期

3 小湊文紀;劉朝勝;;新干線電動車運行狀態下的技術診斷裝置[J];國外鐵道車輛;1987年05期

4 羅安平;;對CS—344紅外碳硫分析儀的技術改造[J];鞍鋼技術;1990年08期

5 呂群;電廠輔機電耗微機實時自動抄表打印裝置[J];電力系統自動化;1993年07期

6 ;[J];;年期

相關重要報紙文章 前1條

1 李繼俊;Windows下自建Fax服務器[N];中國計算機報;2001年

相關碩士學位論文 前1條

1 車海潮;一種基于擠出固化的建筑3D打印裝置設計及驗證[D];華中科技大學;2015年

，

本文編號：1419319