本文選題：中國-東盟 + 制造業��； 參考：《廣西大學》2014年碩士論文

【摘要】：中國-東盟自由貿易區成立以來,雙邊分工模式逐步從基于要素稟賦差異的產業間分工走向基于規模經濟和比較優勢的產業內分工、產品內分工,再到垂直專業化分工,互補性分工程度不斷加深。本文擬研究中國與東盟制造業垂直專業化分工,對垂直專業化分工程度進行測度,分析垂直專業化分工的影響因素,以期為推動中國與東盟國家的國際分工與合作,實現分工比較優勢提供對策。 首先,本文較為系統的總結了已有的關于國際垂直專業化分工的理論。主要包括：主流的定義,與其他相關概念的區別,測度方法及其比較,動因、影響因素和經濟效應等。 其次,對中國-東盟制造業分行業的垂直專業化程度進行測度,發現中國與東盟的制造業垂直專業化程度從2002年到2007年一直處于穩步增長的趨勢,在經歷2008年的世界經濟危機后有了一定程度的下滑,但到2010年后發生大幅逆轉,呈現緩步增長的態勢。另外,本文還分國別測度了中國分別與東盟十國的制造業垂直專業化分工程度,發現我國與馬來西亞、新加坡、泰國的比率較高。 第三,利用面板數據模型從產業層面對中國-東盟制造業垂直專業化分工的影響因素進行研究,發現行業集中度、開放度、成本利潤率對制造業行業整體的分工影響顯著,勞動、資本和技術投入分別對勞動、資本和技術密集型產業影響顯著,但勞動和資本投入對其對應的產業垂直專業化分工程度影響為負。 最后,基于實證研究結論為我國制造業在東盟乃至全球產品價值鏈分工地位的提升提出建議：培育我國各行業大型成熟規模企業,形成規模經濟；加大RD投資,提升中國-東盟分工的技術水平與創新能力；打造中國-東盟區域聯動產品分工鏈,將我國定位價值鏈高端節點；優化分工環境,打造中國-東盟垂直專業化分工的產業集群。
[Abstract]:Since the establishment of the China-ASEAN Free Trade area, the bilateral division of labor has gradually changed from the inter-industry division based on factor endowment difference to the intra-industry division based on economies of scale and comparative advantage, the intra-product division of labor, and the vertical specialization. The degree of complementary division of labor continues to deepen. This paper intends to study the vertical specialization of manufacturing industry between China and ASEAN, measure the degree of vertical specialization, and analyze the influencing factors of vertical specialization, in order to promote the international division of labor and cooperation between China and ASEAN countries. The realization division of labor comparative advantage provides the countermeasure. First of all, this paper systematically summarizes the existing theories of international vertical specialization. It mainly includes: the definition of mainstream, the difference with other related concepts, the measurement method and its comparison, the motivation, the influence factor and the economic effect. Secondly, the vertical specialization degree of manufacturing industry between China and ASEAN is measured, and it is found that the vertical specialization degree of manufacturing industry between China and ASEAN has been increasing steadily from 2002 to 2007. After experiencing the world economic crisis in 2008, there has been some decline, but after 2010 there was a sharp reversal, showing a trend of slow growth. In addition, this paper measures the degree of vertical specialization of manufacturing industry between China and ASEAN countries, and finds that China has a higher ratio with Malaysia, Singapore and Thailand. Thirdly, using panel data model to study the factors that influence the vertical specialization of China-ASEAN manufacturing industry from the industrial level. It is found that the degree of industry concentration, openness and cost-profit rate have a significant impact on the overall division of labor in the manufacturing industry. Labor, capital and technology investment have significant effects on labor, capital and technology-intensive industries, but labor and capital investment have negative effects on the vertical specialization of their industries. Finally, based on the conclusions of empirical research, some suggestions are put forward for the promotion of the division of labor in the ASEAN and global product value chain of China's manufacturing industry: to cultivate large mature enterprises in various industries in China, to form economies of scale, to increase R D investment, and to increase R & D investment. To improve the technical level and innovation ability of China-ASEAN division of labor; to create the China-ASEAN regional linkage product division chain, to position China as the high-end node of the value chain; to optimize the division of labor environment; to create the industrial cluster of vertical specialization of China-ASEAN division of labor.
【學位授予單位】：廣西大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F424;F114.1

【參考文獻】

相關期刊論文 前10條

1 吳福象;經濟全球化中制造業垂直分離的研究[J];財經科學;2005年03期

2 梁運文;張帥;;垂直專業化下中國制造業競爭力層次傳導效應[J];財經研究;2011年12期

3 郭晶;趙越;;高技術產業國際分工地位的影響因素:基于完全國內增加值率視角的跨國實證[J];國際商務(對外經濟貿易大學學報);2012年02期

4 冼海鈞;陳文慧;;基于產業鏈分工視角的中國與東盟國家的產業升級[J];南方金融;2010年08期

5 臧旭恒;趙明亮;;垂直專業化分工與勞動力市場就業結構——基于中國工業行業面板數據的分析[J];中國工業經濟;2011年06期

6 胡昭玲;;產業內貿易與垂直專業化貿易比較及啟示[J];國際經貿探索;2007年06期

7 趙立斌;;東盟在全球產品內分工的地位與跨國公司FDI[J];國際貿易問題;2012年10期

8 張少軍;劉志彪;;國內價值鏈?zhǔn)欠駥?duì)接了全球價值鏈——基于聯立方程模型的經驗分析[J];國際貿易問題;2013年02期

9 彭支偉;劉鈞霆;;東亞垂直專業化分工的發展及其影響因素的實證研究[J];世界經濟研究;2008年12期

10 柯穎;于玲玲;;CAFTA框架下廣西北部灣經濟區物流產業發展戰略研究[J];經濟問題探索;2012年03期

相關博士學位論文 前3條

1 郭炳南;中國參與國際垂直專業化分工的經濟效應研究[D];華東師范大學;2011年

2 趙明亮;中國參與國際垂直專業化分工的經濟效應研究[D];山東大學;2012年

3 謝銳;東亞區域經濟一體化進程中中國貿易結構變遷與經濟效應研究[D];湖南大學;2011年

，

本文編號：2045364