發布時間：2018-10-23 11:07

【摘要】：文章通過投入產出skyline分析方法,測算中日各產業占比、進口率、出口率、自給率及加工貿易率,繪制出skyline圖,并進行比較分析。結果表明,與日本相比,中國的第一產業占比仍然偏高,而第三產業不到40%,仍有很大的發展空間。2000年以前,中日間貿易以產業間貿易為主,存在明顯的互補關系。2000年以后,中國重化學工業的自給率上升,中日產業內貿易增加,中日貿易的競爭關系加強。中國重化學工業的加工貿易比重增加,以及加工貿易方式的改變,使加工貿易的波及效應增加,導致中國的加工貿易誘發額占比大幅上升。
[Abstract]:By means of input-output skyline analysis, this paper calculates the ratio of industries, imports, exports, self-sufficiency and processing trade between China and Japan, draws the skyline diagram and makes a comparative analysis. The results show that compared with Japan, the proportion of primary industry in China is still on the high side, while the tertiary industry is less than 40 percent, and there is still a lot of room for development. Before 2000, Sino-Japanese trade was dominated by inter-industry trade, and there was an obvious complementary relationship between China and Japan. The self-sufficiency rate of China's heavy chemical industry has increased, the intra-industry trade between China and Japan has increased, and the competitive relationship between China and Japan has been strengthened. The increase of the proportion of processing trade in heavy chemical industry and the change of processing trade mode make the ripple effect of processing trade increase, which leads to a sharp increase in the proportion of processing trade induced by China's processing trade.
【作者單位】： 廣東外語外貿大學經濟貿易學院;
【基金】：國家自然科學基金項目(716730632016) 廣東省自然科學基金項目(2016A030313687)
【分類號】：F121.3;F131.3;F752.7;F753.13

【相似文獻】

相關期刊論文 前10條

1 楊玉真;;外資主導加工貿易對我國經濟安全的影響[J];商業時代;2008年31期

2 陳清萍;邵海燕;;安徽省加工貿易對經濟增長貢獻的實證分析[J];技術經濟;2008年05期

3 蘭勇;;加工貿易對湖南省經濟增長貢獻的實證分析[J];國際貿易問題;2008年04期

4 王伶;;加工貿易對江蘇省經濟增長貢獻的實證研究[J];黑龍江對外經貿;2009年05期

5 王晶;曹菁軼;;加工貿易對我國經濟增長影響的實證分析[J];西安郵電學院學報;2009年04期

6 姚志毅;;加工貿易對中國技術和經濟影響的實證分析[J];中國商界(下半月);2009年04期

7 張丁榕;;加工貿易與江蘇經濟增長實證研究[J];金陵科技學院學報(社會科學版);2009年04期

8 吳軼群;;湖南省加工貿易促進經濟增長的實證分析[J];科技信息;2011年10期

9 陸r，

本文編號：2289050